On 2N IP Intercoms, you can start the call also by the keypad or touch display.
We will show you how to setup and use it in two different scenarios.

Prerequisites

• 2N IP Intercom with keypad or touch display and the latest firmware;
  no additional license is required.

Scenarios

• Virtual Numbers

  Call the user by dialling e.g. an apartment number on the keypad, instead of selecting the user from the directory or using the Quick Dial Button.

  
  
  • In 2N IP Intercom web interface, go to section Calling - General Settings - Outgoing Calls
    and enable Calling Virtual Numbers.

• • Go to section Directory and assign a virtual number to a user.

• • Use the virtual number on the keypad and start the call to the user by pressing 📞 symbol.

• Telephone mode
  

  Dial SIP Proxy extensions directly,
  not available for 2N IP Style and 2N LTE Verso.
  
  2N IP Intercom requires registration to SIP Proxy. 
  More information in this article:   SIP Proxy registration on IP Intercoms
  
  
  

  • In 2N IP Intercom web interface, go to section Calling - General Settings - Outgoing Calls
    and enable Telephone Mode.

• Use the keypad to call the SIP Proxy extension by pressing 📞 symbol,
  then dial the extension number and confirm again by 📞 symbol.