2N® LTE Verso
2N® LTE Verso combines minimum installation costs with a full-feature set. Using LTE technology means no other cable apart from a power supply is needed, with a benefit of all functionalities such as a video communication. The main unit with HD camera can be accompanied by RFID reader, Bluetooth or Fingerprint reader supporting modules.
- Ideal retrofit solution
- Secure configuration via cloud
- Pick any of the 14 modules available
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Effective change of video doorbellThanks to its 4G connection, the 2N® LTE Verso is completely independent of cabling. In combination with cloud calling, it offers video calls to mobile phones or hardware answering units.
-
Secure configuration via cloudConnect 2N® LTE Verso to the LTE network and then add your intercom to the 2N® Remote Configuration on My2N.com portal to configure all its features from anywhere in the world via secured VPN connection.
-
Pick any of the 14 modules available2N® LTE Verso is using the same standard module connection as 2N® IP Verso and therefore any of the additional modules can be connected to it, e.g. RFID reader, Bluetooth or Fingerprint reader. Choose a module with technology that suits you the most.
-
Minimum installation costsThe 4G intercom doesn’t need any cables except the power supply and therefore it’s an ideal solution for retrofit in older buildings where an additional wiring installation would be uneconomical.
-
Calls to mobile phone and tablet2N® LTE Verso allows you to call a mobile phone or tablet over the cellular data in case, that even these mobile devices are connected to the Internet.
-
Bluetooth technologyThanks to the Bluetooth module and 2N® Mobile Key app you don´t need to search your RFID cards or remember PIN code anymore. Simply use your smartphone for your identification.
-
Mobile credentials for freeUnlike our competitors, 2N offers mobile credentials via Bluetooth for free. Do not pay 6-10USD per each credential or any other fees. Simply install 2N® Mobile Key app and start to use your phone to open the door!
-
Touchscreen displayThe touchscreen display has all the functions of a mechanical keypad and it also offers structured contact list. It is water resistant, vandal resistant and easy to read even in direct sunlight.
-
Fingerprint readerProvide maximum access security for your building using modern, completely secure, and reliable access technology combined with luxury design.
-
Intuitive controls and searchCreate an intuitive and structured contact list similar to that in your mobile phone. Discover its luxury design and intuitive controls and search.
-
Access controlAchieve a greater level of security for all those at its location. 2N® LTE Verso makes it easy to prevent the entry of unauthorized persons.
-
ModularityThe modularity of this LTE intercom allows you to configure it to your requirements. Select the specific module, accessories and configurable functions.
-
Camera with night visionSee who is standing in front of your door, even in total darkness. Moreover, the camera is hidden from normal view. The intruder has no clue they’re being monitored.
-
Suitable for the disabledThe device can be fitted with an induction loop and pictograms suitable for communication with the hearing impaired.
-
SIP support with no server neededSIP protocol support makes it easy to link the intercom with IP phones and PBX from other producers, without having to connect to the server.
-
Touch keypadA highly sensitive touch keypad reliably records and evaluates every touch and ensures access to the building via the entered PIN.
-
Picture to email2N® LTE Verso allows you to email snapshots of the visitor captured by the camera at the time of the call.
Show more
Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -20°C – 60°C |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Bluetooth Smart technology | |
| Security: | RSA-1024 and AES-128 |
| RFID card reader (optional) | |
| Supported frequencies: | 13.56MHz & 125kHz |
| Support for NFC: | yes, HCE and the 2N® Mobile Key application needed |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32mm |
| Operating temperature: | -20°C – 55°C |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) |
| US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see faq.2n.cz | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°C – 60°C |
| Storage temperature: | -40°C – 70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 107 (W) x 130 (H) x 28 (D) mm |
| 2 modules: | 107 (W) x 234 (H) x 28 (D) mm |
| 3 modules: | 107 (W) x 339 (H) x 28 (D) mm |
| Flush mounting frame – dimensions | |
| 1 module: | 130 (W) x 153 (H) x 5 (D) mm |
| 2 modules: | 130 (W) x 257 (H) x 5 (D) mm |
| 3 modules: | 130 (W) x 361 (H) x 5 (D) mm |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 108 (W) x 131 (H) x 45 (D) mm |
| 2 modules: | 108 (W) x 238 (H) x 45 (D) mm |
| 3 modules: | 108 (W) x 343 (H) x 45 (D) mm |
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Typical Usage
Introducing 2N® LTE Verso
Discover qualities of the latest LTE intercom from 2N that will definitely fulfil all your expectation.
Watch the video Technical area 
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -20°C – 60°C |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Bluetooth Smart technology | |
| Security: | RSA-1024 and AES-128 |
| RFID card reader (optional) | |
| Supported frequencies: | 13.56MHz & 125kHz |
| Support for NFC: | yes, HCE and the 2N® Mobile Key application needed |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32mm |
| Operating temperature: | -20°C – 55°C |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) |
| US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see faq.2n.cz | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°C – 60°C |
| Storage temperature: | -40°C – 70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 107 (W) x 130 (H) x 28 (D) mm |
| 2 modules: | 107 (W) x 234 (H) x 28 (D) mm |
| 3 modules: | 107 (W) x 339 (H) x 28 (D) mm |
| Flush mounting frame – dimensions | |
| 1 module: | 130 (W) x 153 (H) x 5 (D) mm |
| 2 modules: | 130 (W) x 257 (H) x 5 (D) mm |
| 3 modules: | 130 (W) x 361 (H) x 5 (D) mm |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 108 (W) x 131 (H) x 45 (D) mm |
| 2 modules: | 108 (W) x 238 (H) x 45 (D) mm |
| 3 modules: | 108 (W) x 343 (H) x 45 (D) mm |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Effective change of video doorbellThanks to its 4G connection, the 2N® LTE Verso is completely independent of cabling. In combination with cloud calling, it offers video calls to mobile phones or hardware answering units.
- Secure configuration via cloudConnect 2N® LTE Verso to the LTE network and then add your intercom to the 2N® Remote Configuration on My2N.com portal to configure all its features from anywhere in the world via secured VPN connection.
- Pick any of the 14 modules available2N® LTE Verso is using the same standard module connection as 2N® IP Verso and therefore any of the additional modules can be connected to it, e.g. RFID reader, Bluetooth or Fingerprint reader. Choose a module with technology that suits you the most.
- Minimum installation costsThe 4G intercom doesn’t need any cables except the power supply and therefore it’s an ideal solution for retrofit in older buildings where an additional wiring installation would be uneconomical.
- Calls to mobile phone and tablet2N® LTE Verso allows you to call a mobile phone or tablet over the cellular data in case, that even these mobile devices are connected to the Internet.
- Bluetooth technologyThanks to the Bluetooth module and 2N® Mobile Key app you don´t need to search your RFID cards or remember PIN code anymore. Simply use your smartphone for your identification.
- Mobile credentials for freeUnlike our competitors, 2N offers mobile credentials via Bluetooth for free. Do not pay 6-10USD per each credential or any other fees. Simply install 2N® Mobile Key app and start to use your phone to open the door!
- Touchscreen displayThe touchscreen display has all the functions of a mechanical keypad and it also offers structured contact list. It is water resistant, vandal resistant and easy to read even in direct sunlight.
- Fingerprint readerProvide maximum access security for your building using modern, completely secure, and reliable access technology combined with luxury design.
- Intuitive controls and searchCreate an intuitive and structured contact list similar to that in your mobile phone. Discover its luxury design and intuitive controls and search.
- Access controlAchieve a greater level of security for all those at its location. 2N® LTE Verso makes it easy to prevent the entry of unauthorized persons.
- ModularityThe modularity of this LTE intercom allows you to configure it to your requirements. Select the specific module, accessories and configurable functions.
- Camera with night visionSee who is standing in front of your door, even in total darkness. Moreover, the camera is hidden from normal view. The intruder has no clue they’re being monitored.
- Suitable for the disabledThe device can be fitted with an induction loop and pictograms suitable for communication with the hearing impaired.
- SIP support with no server neededSIP protocol support makes it easy to link the intercom with IP phones and PBX from other producers, without having to connect to the server.
- Touch keypadA highly sensitive touch keypad reliably records and evaluates every touch and ensures access to the building via the entered PIN.
- Picture to email2N® LTE Verso allows you to email snapshots of the visitor captured by the camera at the time of the call.
Show more
Discover the Benefits of 2N Products Integration
Connect the 2N® LTE Verso intercom to the products of global leaders in the field of IP telephony, camera systems or home automation. Click on the logo of the selected partner for more detailed information.
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Technical Parameters
| Signalling protocol | |
| SIP 2.0 (RFC - 3261) | |
| Buttons | |
| Buttons: | transparent buttons with white backlight and easily removable label |
| Number of buttons: | 1 to 146 |
| Numeric keypad: | optional |
| Audio | |
| Microphone: | 1 built-in microphone |
| Speaker: | 2W |
| Sound pressure at 1kHz at 1m distance: | 78dB |
| Audio stream | |
| Codecs: | G.711, G.729, G.722, L16/16kHz |
| Camera | |
| Resolution – JPEG: | 1280 x 960px |
| Resolution – video call: | 640 x 480px |
| Viewing angle: | 128° (H), 95° (V), 134° (D) |
| Night vision: | yes |
| Video stream | |
| Codecs: | H.263+, H.263, H.264, MJPEG, MPEG-4 |
| Touchscreen (optional) | |
| Buttons and keyboard functions | |
| Operating temperature: | -20°C – 60°C |
| Coverage level: | IK07 |
| Bluetooth reader (optional) | |
| Bluetooth Smart technology | |
| Security: | RSA-1024 and AES-128 |
| RFID card reader (optional) | |
| Supported frequencies: | 13.56MHz & 125kHz |
| Support for NFC: | yes, HCE and the 2N® Mobile Key application needed |
| Fingerprint reader (optional) | |
| Sensor: | optical sensor protected by resistant glass |
| Reliability: | algorithm for fake fingerprint detection |
| Resistance: | resistant to water and dust |
| Status signalisation: | acoustic and with the aid of multicoloured LEDs |
| Sensing area: | large with dimensions of 15.24 x 20.32mm |
| Operating temperature: | -20°C – 55°C |
| Certification: | FBI PIV |
| Interfaces | |
| Power supply: | 12V/2A DC |
| Network connection: | EU Bands (MHz): B1(2100), B3(1800), B7(2600), B8(900), B20(800) |
| US Bands (MHz): B2(1900), B4(AWS1700), B5(850), B12/B13(700) | |
| output power - Class 3 (0.2W, 23dBm) @ LTE | |
| Typical data use: | 30MB/month plus 4MB/call minute (additional services may increase data use) |
| for calculation details see faq.2n.cz | |
| Switch output: | NC/NO contacts, max 30V/1A AC/DC |
| Active switch output: | 8 to 12V DC depending on power supply (source voltage minus 2V), max 400mA |
| Tamper switch: | optional accessory |
| Supported protocols: | SIP2.0, DHCP opt. 66, ONVIF, SMTP, 802.1x, RTSP, RTP, TFTP, HTTP, HTTPS, Syslog |
| Mechanical properties | |
| Operating temperature: | -40°C – 60°C |
| Storage temperature: | -40°C – 70°C |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Officially certified outdoor coverage level: | IP54, IK08 |
| Surface mounting frame – dimensions | |
| 1 module: | 107 (W) x 130 (H) x 28 (D) mm |
| 2 modules: | 107 (W) x 234 (H) x 28 (D) mm |
| 3 modules: | 107 (W) x 339 (H) x 28 (D) mm |
| Flush mounting frame – dimensions | |
| 1 module: | 130 (W) x 153 (H) x 5 (D) mm |
| 2 modules: | 130 (W) x 257 (H) x 5 (D) mm |
| 3 modules: | 130 (W) x 361 (H) x 5 (D) mm |
| Flush mounting box (minimum hole dimensions) | |
| 1 module: | 108 (W) x 131 (H) x 45 (D) mm |
| 2 modules: | 108 (W) x 238 (H) x 45 (D) mm |
| 3 modules: | 108 (W) x 343 (H) x 45 (D) mm |
Show more
