2N Integration HUB
BesKNX
BesKNX by Ingenium is a vanguard company with headquarters in Spain. They are dedicated to the design, development and manufacture of the highest home automation technology since 1998. Following this path traced by innovation, Ingenium proposed a wired product line based on BUSing protocol, and also Wings series, a line of wireless devices based on BUSing wireless that will make the home automation available to everyone.
The Ingenium system is completely open and royalty-free, allowing other manufacturers to design equipment under its standard, as well as the development of integrations over devices or gateways with other standards.
The Ingenium system is completely open and royalty-free, allowing other manufacturers to design equipment under its standard, as well as the development of integrations over devices or gateways with other standards.
- Home Automation
- KNX
Integration with 2N products
-
General Description
The integration of 2N IP Intercoms into a system managed by BesKNX is typically realized by utilizing a KNX/IP Gateway or a dedicated Visualization Server to bridge the two protocols.
The 2N intercom, upon a triggered event, sends a configurable HTTP command (URL) to the intermediary device. This intermediary device, often a logic server provided or managed by BesKNX, translates the HTTP command into a KNX Group Address telegram. This allows the 2N event to instantly trigger any action on the KNX bus, such as flashing lights, enabling a "Do Not Disturb" scene, or activating an alarm. Conversely, the KNX system can control the 2N relay outputs by sending commands that the server translates into an HTTP API request directed back to the 2N intercom. Video and audio streaming are usually handled directly between the 2N intercom and a SIP client, or a dedicated video monitor within the KNX setup.
Key features
- Video from intercom
- Calls from intercom
- Door lock control
- Video to intercom
- Call fordwarding
- Missed call log
Supported versions
2N FW version - Version 2.30+BesKNX HW/SW version - Version 1.0.41719 or higher