List of published FAQs

On this page you will find the current list of published FAQs. This page is for testing purposes only.

 

• Which TCP-IP ports do I need to open for the connection to the Omega PBX?
• How to upgrade firmware from 4.05 or earlier to 4.06 or higher on Omega?
• Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue MAX?
• 2N SIM Star blocks FW upgrade on gateways
• How to report an issue on 2N SIM Star?
• How to set a call simulation on 2N SIM Star Server?
• CDR - How can I delete CDR?
• Connection via HyperTerminal - How can I connect to VoiceBlue Lite using HyperTerminal?
• Call routing - How can I route all incoming calls to receptionist or operator?
• Firmware 2N VoiceBlue Lite - How can I upgrade firmware?
• IP setting - How can I use NAT keep alive?
• Do 2N VoiceBlue Lite gateways support data transfer?
• License - How can I use license key?
• Mobility Extension - How can I configure Mobility Extension?
• No tones - I can't hear any tones on 2N VoiceBlue Lite when setting up a call. What should I do?
• IP setting - How can I change the IP address of 2N VoiceBlue Lite?
• How to backup configuration and how to capture a trace on 2N Access Unit
• Factory reset on 2N Access Units
• 2N IP Intercoms - How to add user access credentials
• Configuration - How to set 2N VoiceBlue MAX
• Callback - How to set Callback on 2N VoiceBlue MAX?
• CLIP - Incoming CALL ID transfer to phone or PBX
• Firmware upgrade - How to make a firmware upgrade of 2N Access Unit?
• Gmail: Unable to send emails or log in after 2022-05-30?
• How to provide all information to effectively resolve a technical issue on 2N Access Unit?
• Connecting an old intercom to a 2N Access Unit using a 2N Security Relay
• Network Trace - How to get Wireshark network trace and network trace from 2N BRI Lite / Enterprise?
• How to edit the called number from PBX on 2N BRI Lite and 2N BRI Enterprise?
• How many simultaneous calls can be made at once through one 2N BRI Lite or 2N BRI Enterprise?
• IP address - How to get IP address of 2N Access Units?
• Issues accessing the web interface on macOS
• Dial plan - How to adjust the number of outgoing call?
• Can I use 2N BRI Lite or 2N BRI Enterprise with my PBB?
• Do 2N BRI Lite and 2N BRI Enterprise support data transfers?
• Event reporting on 2N BRI Lite and 2N BRI Enterprise
• Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N BRI Lite and BRI Enterprise
• REX button - How to connect to a 2N Access Unit
• Static IP address - How to set up static IP address on 2N Access Units?
• Firmware Upgrade - How to make a firmware upgrade on 2N BRI Lite and 2N BRI Enterprise?
• Factory reset - How to make a factory reset of 2N BRI Lite/Enterprise
• Calling - Outgoing call through BRI Lite/Enterprise is rejected
• ISDN trunk interconnection Alcatel
• AutoCLIP routing is enabled but not working
• Calling - A call is not disconnected immediately
• Static IP address - How to set up static IP address on 2N BRI Lite/Enterprise
• Static IP address on MikroTik router
• Installation - How to install 2N SIM Star Server?
• Trace - How to get a trace from VoiceBlue Lite?
• Technical issue - How to report an issue on VoiceBlue?
• AutoCLIP Routing - How to set in 2N VoiceBlue MAX
• Firmware Update - How to do firmware update on 2N VoiceBlue MAX?
• How to setup FXS to GSM calls with VoIP backup on 2N VoiceBlue MAX
• How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue MAX?
• 2N Records Manager installation
• Web interface access when running old firmware on Indoor View
• Access logs of 2N Mobile Key
• 2N NetStar - Initial configuration - How to start?
• Allwin (billing software) does not work
• How to install AoC reader with 2N NetStar
• 2N Starpoint IP Phones - How to synchronize phonebook with 2N NetStar
• Call recording - how to record marked calls on NetStar?
• AutoClip Routing on NetStar
• Audio files - Progress tones - Required format in 2N Netstar
• Audio-relay card - How to set up jumpers on NetStar
• What is Callback?
• voip-gateway-how-to-set-2n-netstar-as-a-voip-gateway
• voip-card-led-is-solid-red
• Wireshark trace - How to make a trace of call
• VoiceMail to Email - How to set it in 2N NetStar
• CTI Interface - How to set up_version 3.X.X
• CLIP is NOT displayed on analogue lines CO
• Call transfer doesnt work and why?
• Conference - How to create a conference call and conference room
• SIP Proxy - How to register 2N IP Intercom to 2N Netstar or 2N Netstar SW
• Creation of SIP Trunk
• SMS CallBack - How to set in 2N NetStar
• SMS at no answer - How to set it in 2N NetStar
• Dialthru gateway - How to set 2N NetStar as a dialthru gateway
• Email to SMS - how to set it in 2N NetStar
• Do you hear some clicking during the call or the call is even disconnected?
• How to backup the database and how to capture a trace 2N NetStar
• Factory reset - How to make a factory reset of 2N NetStar
• Firmware upgrade - How to make a firmware upgrade of 2N NetStar
• External storage - How to create an external storage
• Failure of network storage manager
• Firmware downgrade - Is it possible to downgrade 2N NetStar?
• Format of audio tones
• How to provide all information to effectively resolve a technical issue on 2N NetStar?
• Forwarding call does not work. What should I check?
• How to upgrade Records Manager
• Free minutes - How to set them on 2N NetStar
• ID Tables - How to set it in 2N NetStar
• incoming-call-drops-after-first-ring
• ISDN - Basic principle of VOIP operation and ISDN synchronization
• IVR - How to set it in 2N Netstar
• Battery failure signalization - EasyGate PRO ""snake"" signal strength
• PBX booster - How to set 2N NetStar as a PBX booster
• Microsoft Outlook - How to integrate Microsoft Outlook with 2N Netstar
• Mobility Extension - How to create ME in 2N NetStar or 2N NetStar SW
• NetStar unreachable from the programming tool
• Netstar diagnostic tool pinout
• LDAP - How to synchronise Phone book in 2N NetStar via LDAP protocol
• No card except of CPU is on after you switch on the NetStar?
• NS Admin Tool - Supported operating systems
• PC Operator and Application server - How to install it in 2N NetStar
• SIP Proxy - How to create it and add VoIP terminal
• PRI gateway - How to set 2N NetStar as a PRI gateway
• Problems with sending and receiving emails from NS
• Services with your Linksys phones do not work
• SIP Provisioning - How to set it in 2N NetStar
• Recording - How to record the calls on VoIP trunk and PRI interface
• AUX card - I'm connected via RS232 to COM2(AUX card) and I cannot upload new voice messages
• How to provide all information to effectively resolve a technical issue on 2N StarGate or 2N BlueTower?
• 2N StarGate - Multiple outbound SMS web users
• Avaya - How to interconnect with Avaya Aura Communication Manager using ISDN
• SNMP - How to configure SNMP
• User Reservation - How to set it in 2N NetStar
• SMS reader - How to install it with 2N NetStar
• Static IP address - How to set up static IP address for 2N NetStar
• SMS to EMAIL - How to set it in 2N Netstar
• Summer or Winter time does not change automatically
• There is none or only oneway audio on your VoIP calls
• VoiceMail Classic - How to set it in 2N NetStar
• Credit check - How to check credit of SIM card?
• Connection via HyperTerminal - How can I connect using HyperTerminal?
• Call routing - How can I allow dynamic CLIP routing?
• Factory reset - How to make a factory reset
• Call routing - Call to GSM number goes over PRI2 interface
• Connection via Putty - How can I connect using Putty?
• Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N StarGate and 2N® BlueTower
• Free minutes - All free minutes are exceeded and I still want to be able to make calls GSM
• Hardware - How to upgrade older 2N StarGate to the latest HW version
• Free minutes - I want to use only free minutes on my SIM cards. What should I set it?
• Free minutes - Why is SIM1 still connected to the network after all free minutes have been used?
• Hardware - Compatibility of hardware between the latest (M202) and old (M112) CPU
• How to connect a 2N GSM gateway to an IP PBX
• INIT status - Why is Init LED blinking on GSM or UMTS card on 2N StarGate or 2N BlueTower?
• Installation - How to install a new gateway? - Step-by-step guide
• INIT status - What to do if VoIP card is still in INIT status?
• IP setting - How to call through gateway on private network from public network?
• IP setting - How to register the gateway on domain name instead of IP address?
• INIT status - What is necessary to check, if INIT led light on VoIP card shines red?
• INIT status - What to do if all cards are still in "INIT" status?
• SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Microsoft Outlook?
• SMS at no answer - SMS at no aswer does not contain the called party number
• SIM card - What to check if SIM card does not log to GSM network?
• SIM card usage - How to switch SIM cards at the specific time of day?
• SIM card usage - How to switch SIM card every 4 hours?
• IP setting - How to set the default GW/mask for the IP of VoIP card?
• Legacy tools - M112 CPU
• License - How to upload licenses?
• PRI card - What to check if LED Lay 1 and/or 2 on PRI card do not light up/blink
• Network Trace - How to get Wireshark network trace and network trace from 2N StarGate / 2N BlueTower?
• Fax - How to solve a problem with faxing over GSM network?
• License - What information is needed for generating license?
• License extension - I need to extend my license for 2N StarGate or 2N BlueTower. What information should I give you?
• LOG file - I see the message "HCX err" in the gateway log. What does it mean?
• 2N OfficeRoute & Alcatel OXO connected via SIP trunk
• Does the 2N OfficeRoute support HSPA technology?
• E-mail to SMS - How to set up
• Can I send a FAX with my 2N OfficeRoute?
• Default login credentials
• FAX - How to configure
• Data - Which interfaces can be used for a data call with 2N SmartGate?
• Data and voice - Is it possible to make a voice call and data transferring at the same time?
• FAX - How to send or receive FAX message or data?
• How to provide all information to effectively resolve a technical issue on 2N EasyGate
• Hardware grounding - How to ground 2N EasyGate and 2N SmartGate
• How to provide all information to effectively resolve a technical issue on 2N SmartGate
• How to do firmware update?
• FAX - How to send FAX message or data to GSM and from GSM?
• EasyGate - Data and voice - Is it possible to make a voice call and data transferring at the same time?
• SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Mozilla Thunderbird?
• GSM to VoiceMail - How to route all incoming calls from GSM to VoiceMail
• H.323 trunk - How to configure
• Iam not able to connect to the configuration interface of OfficeRoute
• IVR - How to create (without 2N IVR Editor)
• How many ME users can I use?
• How many UMTS channels has got the 2N OfficeRoute?
• How to make a factory reset of 2N Office Route?
• How to deny malicious calls from internet that make enormous bills on OfficeRoute
• SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Windows Live Mail?
• How to report technical issue on 2N OfficeRoute?
• if-you-need-to-change-an-ip-of-the-2n-officeroute
• Voice recognition - How to set Voice recognition (number portability detection)?
• Test call - How to make test calls?
• Trace - How to get internal trace from 2N StarGate / 2N BlueTower?
• Tarrifs - Tariffs settings complete description
• Static IP address - How to set up static IP address SG EN
• Trace - trying to trace ("AT!Rx", "AT!Lx" commands) 2N StarGate or 2N BlueTower responds "BUSY".
• LCR - How to use
• Normalization - How to use
• Settings of 2N OfficeRoute as a GW for Siemens OpenScape PBX
• I forgot the Admin password
• What to do when OfficeRoute stopped working after a month.
• Mobility Extension - How to configure
• SIP Proxy port - How to change it from default 5060
• Wireshark trace - How to make a trace of a call?
• What is the maximum number of VoIP calls via UMTS module?
• Voicemail - How to configure
• Analogue modems - supported protocols by 2N® EasyGate and 2N® SmartGate
• SIP Proxy - How many users can be registered?
• VoIP card - I have a new VoIP card. What should I do to make it work?
• Calling - How many simultaneous calls can I do with 2N SmartGate?
• confirmation-mode-how-to-configure-confirmation-mode-on-2n-lift1
• Connection options - What are the possibilities of connection of 2N SingleTalk?
• Call between 2N LiftIP and IP Phone with AXIS Camera Feed
• Configuration backup and troubleshooting EasyGate IP
• Confirmation-mode-How-to-configure-confirmation-mode-on-2N-Lift8
• Adding external Axis camera to 2N Indoor Touch 2.0
• Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
• Calculating data consumption on LTE Verso
• OpenVPN server & client
• KNX connectivity with 2N IP Intercoms
• HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
• Language mutation - How to create own language mutation for 2N IP Intercoms
• Connection of external buttons to the 2N IP Intercom
• Configuration of electrical outputs on 2N IP Intercoms
• Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8004-VE
• Description and properties of 2N Indoor Touch 2.0
• Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8105-E
• 2N IP Style - bi-directional video setup
• 2N® IP Style - custom scene crop option
• Connecting bell button to 2N Indoor Touch 2.0
• REX button connectivity
• CLIP - Does 2N EasyGate support CLIP function?
• Calling - How many simultaneous calls can I do with 2N EasyGate?
• CLIP - Does 2N SmartGate support CLIP function?
• Connection - How can I connect SmartGate?
• Connection - Can I use 2N EasyGate instead of the landline?
• Data - Which interfaces can be used for a data call with 2N EasyGate?
• Configuration - How to program 2N EasyGate?
• Configuration - How to program 2N SmartGate?
• SIM card logging - What to check if SIM card is not logging?
• How to send and receive a SMS
• RMA - What to check before the RMA process for 2N analog gateway
• Interconnection - Can I use 2N EasyGate with my PBX?
• Monitoring of batteries on EasyGate PRO
• Data transfer - Does 2N VoiceBlue Next gateway support data transfer?
• Elastix PBX - How to interconnect with Elastix PBX?
• How to configure sending of SMS messages via SMPP feature on 2N gateways
• Callback - How to set SMS Callback on VoiceBlue Next
• Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N VoiceBlue Next
• SMS messages - How to configure Email2SMS and SMS2Email features with Mozilla Thunderbird on VoiceBlue NEXT?
• SMS messages on VoiceBlue Next - How to set SMS at no answer?
• SMS messages - How to send and receive messages? - SMS gateway integration
• Telephone number VoiceBlue Next - Can I replace SIM card telephone number with my own number?
• Test call for VoiceBlue Next- How to make a test call from softphone?
• Specification of Maximum capacity in 2N VoiceBlue Next
• Trace - How to get internal trace from 2N VoiceBlue Next?
• unable-to-establish-connection-between-2n-voiceblue-next-and-2n-xapi-server
• upgrade-from-firmware-119-and-lower-to-firmware-122-and-higher
• 2N VoiceBlue Next - How to configure it with Auerswald PBX?
• How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue Next?
• CUCM - How to interconnect with CISCO Call Manager 6, 7, 8?
• Configuration - Can I use 2N VoiceBlue Next with my PBX?
• Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue Next?
• License status: Locked
• panasonic-ncp-how-to-interconnect-with-panasonic-ncp-pbx
• SMPP connection - How to connect Diafaan SMPP server
• Firmware Upgrade - How to make a firmware upgrade on 2N VoiceBlue Next?
• Static IP address - How to set up static IP address on VBN?
• Student Monitoring System - VoiceBlue Next
• Factory reset - How to make a factory reset VBN
• Alcatel-Lucent OXE (OmniPCX Enterprise) R12: How to interconnect with 2N VOICEBLUE NEXT
• Call routing - SIM selection based on called number
• Call routing - SIM selection based on called number (version 1.19 and lower) on VoiceBlue Next
• Configuration - How to set 2N VoiceBlue Next?
• Call routing - Forwarding call to one extension number - VoiceBlue Next
• SMS messages - How to send and receive messages with Microsoft Exchange server?
• Call disconnection - What to do if a call still continues up to 30s after call ended?
• CCM Express version 4.1 - How to interconnect with CCM Express version 4.1?
• IP setting - How to register the gateway on domain name instead of IP address?
• Automation, Multicast - Receiving multicast paging from up to 5 sources
• Automation, Multicast paging - How to configure paging from 2N IP Intercoms
• Bluetooth - Encryption Keys for Location
• Downloading network trace, syslog and configuration file from 2N Indoor Touch 2.0
• LTE Debug Module – how to use it?
• SNOM 870 - Setup with 2N IP Intercom
• Port Randomization in 2N IP Mobile (Intercoms)
• Video - 2N IP Verso - Fingerprint module installation and configuration
• Video - 2N® IP Verso - Touch display module options
• Video - 2N IP intercom - IP address, how to find it out and switch between DHCP and static modes
• Direct call without SIP Proxy registration
• Display configuration
• Slideshow on 2N IP Intercoms display
• Gmail SMTP Service - How to configure with Intercom units
• HTTP API - Configuration upload
• Seznam SMTP service - How to configure with Intercom units
• 2N IP Intercoms – Integration with 3rd party NVR/VMS systems without ONVIF and RTSP
• Calls from 2N Indoor Touch to 2N IP Intercom
• 2N Security Relay - Describtion and usage with 2N IP Intercoms
• Setting up call from/to 2N IP Intercom in 2N Indoor Touch 2.0
• Directory setup of 2N IP Style
• Easy unlock and call hang in one step
• License - How to get a license for 2N IP Intercom
• Lift access control - configuring 2N systems
• MicroSD card - A list of tested and approved MicroSD cards for 2N Indoor Touch 2.0
• The example of OSDP module connecting and using on 2N Intercom
• Multicast Discovery function on 2N Indoor Touch 2.0
• Delivery solution with My2N automation
• Comparison of IP Verso and LTE Verso
• How to connect external Axis Camera to Sentrio
• One card for 2N Fortis and 2N Picard at the same time
• Network proxy settings in 2N Access Commander – what they are and when to use them
• 2N Fortis deployment with 2N Access Commander and Fortis Commander
• Electronic lock groups - how to efficiently set up more 2N Fortis devices in an installation
• 2N Fortis Commander - overview and how to use it
• Factory reset - How to do factory reset for 2N Fortis devices
• 2N Fortis Commander - How to continue programming your site with new programming software and Access Commander 3.5
• Milestone XProtect - Video Pop-up on 2N Device's Action
• Time profiles - managing time restricted access for 2N Fortis
• Device IP Callback
• Logs management
• Battery replacement
• New API Authentication Method for My2N Integrations
• Elevator Center - user rights and differences
• Homebridge plugin for 2N intercoms
• I don't get screenshots of missed calls in My2n App or in answering unit history call
• Calling locally between 2N IP intercom and 2N IP Phone D7A
• Axis Network I/O Relay - Controlling using HTTP commands
• My2N - How to sign up
• Dormakaba locks - How to integrate one or more in your My2N site
• Call logs - How to use them in 2N Access Commander
• Deep clean cookies and site data of Access Commander's webpage
• Direct calling to 2N Indoor Touch 2.0 from AXIS A8207-VE
• RMA - What to check before the RMA process for 2N Net Audio devices
• Automation, Multicast - How to receive multicast paging from up to 5 sources
• Video - 2N SIP Speaker Horn - Basic setting
• 2N SmartCom PRO / Factory reset - How to make a factory reset
• AMS (Autonomous Metering System) - protocol IEC 62056-21
• Ethernet port - 2N SmartCom PRO ETH configuration
• AMS for IN1 IN2 IN3 (pulses S0, analog value, digital value)
• AMS (Autonomous Metering System) - protocol M-Bus
• Difference between Standalone and TCP Client mode in 2N SmartCOM (PRO)
• Test server - 2N SmartCom server configuration
• Wireless M-bus - 2N SmartCom PRO decryption configuration
• How to configure Wireless M-Bus port
• Input S0 - 2N SmartCom/2N SmartCom PRO S0 pulse counting
• How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
• 2N SmartCom PRO - Input circuits
• User Defined Functions (UDF) - what is it and how to configure it in 2N SmartCOM?
• Password RS232 - 2N SmartCom/2N SmartCom PRO against unauthorized configuration
• 2N SmartCom/2N SmartCom PRO - Basic configuration
• How to detect M-Bus meters by AT command
• 2N SmartCom PRO M-Bus overview
• How to configure communication port on RS-232/RS-485 interfaces
• How to read data from 2N SmartCOM (PRO) memory?
• Test server with web interface - 2N SmartCom server configuration
• How to detect M-Bus meters by SMS
• 2N SmartCom PRO - Terminal error buffer code description
• AMS error codes description (M-Bus, IEC 62056-21, S0, IN, ONF)
• How to do the module FW upgrade
• How to connect ZigBee device to 2N SmartCOM PRO (ETH)?
• How to connect M-Bus device to 2N SmartCOM PRO ETH?
• How to connect meter supporting protocol IEC 62056-21 to 2N SmartCOM PRO ETH?
• How to connect meter with pulse output (S0) to 2N SmartCOM PRO ETH?
• Port Forwarding - I am not able to access any port specified in Port Forwarding
• Input circuit - 2N SmartCom/2N SmartCom PRO calibration
• How to set up Prepaid Wi-Fi Hotspot
• How to report technical issue on 2N EasyRoute / 2N SpeedRoute
• Internet connection does not work on 2N SpeedRoute or 2N EasyRoute
• How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
• Server logs - 2N SmartCom server
• How to report technical issue - 2N SmartCom/2N SmartCom PRO
• LED indication - 2N SmartCom/2N SmartCom LED indication
• 2N IP intercom into My2N - I don't have a card with the Security Code
• Answering Unit Registration and Configuration of Calls in My2N
• 2N IP intercom into My2N using the Security Code
• Indoor Touch 1.0 - How to configure 2N IDT1.0 to make and receive calls through My2N
• Indoor Touch 2.0 - How to configure 2N IDT 2.0 to make and receive calls through My2N
• 2N LTE Verso - Registration to My2N and basic setup
• Company Admin - Add/Delete
• Axis network intercom into My2N
• My2N - 2N Mobile video credit vouchers and licenses
• Change to the new apartment license model in My2N
• Call in sequence or parallel using My2N
• Connect 2N IP Phone D7A to My2N
• IP intercom - How to configure call settings from My2N platform
• Change of billing information (company name & address) in My2N
• This is a walkthrough how to interconnect 2N SIP SPEAKER HORN with MY2N to let a user announce from a cell phone to the 2N SIP SPEAKER HORN
• Firmware Update via My2N
• 3rd party SIP device - How to add it in My2N site
• Credit card - How to change it
• My2N account management (company/site admins & users)
• I did not received an e-mail
• Site models - Differences and Examples
• HAR file - How to generate them for Chrome
• Cannot add a device to My2N/move a device to a different My2N account
• How to restrict calling from the My2N app to the 2N Intercom
• LTE Verso - How to calculate data consumption
• Overview of the Ports, Domains and Codecs of My2N and Elevator Center
• Mobile Video troubleshooting
• How to add smartphone or tablet in My2N account
• Subscription - How to purchase in My2N
• MY2N Platform Security Overview
• No video? Try to check the following solutions!
• How to setup alternative phonebook in My2N
• Video - My2N platform - registration and setup of cloud calling
• What to do if the intercom does not dial Mobile Video
• Unlock the door with the switch codes in My2N - How to set it
• How to seamlessly switch from 2N Mobile Video to the My2N app
• How to make a custom ringtone for Mobile Video application on iOS
• Difference between logins in My2N app
• Your account does not contain any assigned devices - message in My2N application
• How to enable external camera on My2N
• How to provide logs from the My2N application
• How to fix push notifications for Android OS
• iOS - no video preview (Fullscreen / Banner mode)
• My2N app and 3rd party apps
• One-button call setup of 2N Analogue Vario
• 2N Analog Intercom / Incoming call - does not accept the incoming call
• Factory reset - How to make a factory reset on 2N Analog Intercom
• 2N Analog Intercom hangs up - does not hang up automatically
• Unsatisfied Audio quality in 2N Analogue Intercoms
• 2N Analog Intercom - How to provide all information to effectively resolve a technical issue
• Busy tone - When the button is pressed, 2N Analog Intercom gives the busy tone
• 2N Analog Intercom / Busy tone - Parameters setting
• Communication between 2N Indoor Compact and 2N IP intercom via Device ID
• Peer-to-peer call to 2N Indoor Compact from the AXIS door station A8004-VE
• Configuring HTTP Commands on 2N Indoor Compact
• Firmware upgrade - How to make a firmware upgrade on 2N Indoor Compact
• Factory reset - How to do factory reset for 2N Indoor Compact
• 2N Analog Intercom does not work after installation
• Vivotek video server - How to connect with 2N Analog Intercom
• RMA - What to check before the RMA process for 2N analog Intercoms
• Programming - Entering the programming menu
• VoIP ATA converter - How to connect 2N Analog Intercom via Well ATA-171P converter to VoIP server
• Interoperability manual for Gigaset DX800A
• Service password - I forgot the service password
• Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8105-E
• Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8207-VE
• Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8105-E
• Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8207-VE
• Direct calling to 2N Indoor Talk from the AXIS door station AXIS A8004-VE
• Connecting Doorbell to the 2N OS Indoor Units
• Video – 2N Indoor Compact - flush installation guide
• HTTP Commands – How to configure them in Answering units
• Factory reset - How to do factory reset for 2N Indoor Talk
• Communication via Device ID of 2N IP intercom
• Firmware upgrade - How to make a firmware upgrade on 2N® Indoor Talk
• How to provide all information to effectively resolve a technical issue with 2N Indoor Talk
• Setting up call from a 2N IP intercom to a 2N Indoor Talk and vice versa
• Video – 2N Indoor Talk - flush installation guide
• Congifuring more unlock buttons in 2N Answering Units
• 2N Indoor View - How to set up calling via My2N
• Setting 3rd party IP camera in 2N Indoor View
• How to configure HTTP Commands on 2N Indoor View
• Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8004-VE
• How to do factory reset for 2N Indoor View
• Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8105-E
• Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8207-VE
• Setting up calls from and to 2N IP intercom
• How to provide all information to effectively resolve a technical issue with 2N Indoor View
• How to make a firmware upgrade on 2N Indoor View
• Firmware upgrade - How to do firmware upgrade on device 2N Clip
• How to provide all information to effectively resolve a technical issue with 2N OS device
• Factory reset - How to do factory reset on 2N Clip
• One click unlocking and hanging up mode
• How to use external notifications and connect with relay on the 2N Indoor Touch?
• Direct call - How to set up a 2N IP Handset for a direct SIP call (without PBX) and how to open door
• Register a 2N IP Handset to My2N or another PBX / proxy server
• Factory reset - How to reset the settings of 2N IP Handset to the factory values
• How to use Group Authentication / Access key in communication between 2N IP Intercoms and 2N Indoor Touch
• How to switch between the internal and external camera from 2N Indoor Touch
• Reporting a technical problem with 2N IP Handset device (firmware, reset, backup, trace, logs)
• Configurating 2N IP Mobile v.4 to call over a SIP proxy. Skip to end of metadata
• Custom language localization in 2N IP Mobile Application
• How to connect a doorbell button to 2N Indoor Touch?
• Differences between the old model 2N Indoor Touch and new one 2N Indoor Touch 2.0
• How to use the Video voice mail on 2N Indoor Touch?
• How to use the DnD (Do not Disturb) mode on 2N Indoor Touch?
• How to install a 3rd party Android application on 2N Indoor Touch?
• Working with HTTP API on 2N Indoor Touch
• Static IP address - How to set a static IP address on a 2N Indoor Touch 2.0
• Video - 2N Indoor Touch - doorbell button installation and configuration
• List of tested 3rd party applications that can be installed on 2N Indoor Touch
• MIFARE DESFire EV2/EV3 - How to install 2N PICard Commander and program cards
• Trace - How to get internal trace from 2N BRI Lite / 2N BRI Enterprise?
• Remote control - How to setup and use Remote Control over GSM?
• SIM card usage - How to use both SIM cards equally?
• ISDN trunk interconnection Siemens
• Trace - How to get internal trace from 2N VoiceBlue MAX?
• Virtual Ring Tone - How to upload Virtual Ring Tone Message without configuration tool?
• 2N Contact Centre Solution installation
• Firmware version numbering, configuration tool version numbering
• How many system (key) phones can be used on Omega?
• Database backup - How to backup the database and how to capture a trace 2N NetStar SW
• Factory reset - How to perform factory reset of 2N NetStar
• Audio - What can I do when call is connected but I can't hear any voice? (RTP packets are empty)
• 2N VoiceBlue Lite with my PBX station - Can I use?
• Audio - What should I do if I can't hear ringback tone?
• The IMSI or SCID file cannot be imported in 2N SIM Star
• How to deny malicious calls from internet which make enormous bills on Office Route
• How to report a problem on Omega series?
• Mobility Extension (ME) for a user on Omega
• How to get the Omega PBX to default values?
• Virtual Sound Card - Login was unsuccessful
• HTTP - How to trigger pre-recorded announcement message by HTTP command
• Video - 2N SIP Mic - Basic setting
• Firmware upgrade - How to make a firmware upgrade
• How to configure Wireless M-Bus port on 2N SmartCom PRO with fw 1.13.x and latest
• License - 2N SmartCom server
• Static IP address - How to set up static IP address
• How to read analog value on input 2N SmartCOM PRO ETH?
• 2N Net Audio Decoder - Wireless connection of the unit via NETGEAR Wi-Fi client
• Login details for Control panel in SW version 1.3.6 or higher
• Firmware - How to make a firmware upgrade
• Static IP address - How to set up static IP address
• HTTP commands
• RTP destinations - How to test it with VLC media player?
• Static IP address - How to set up static IP address for 2N SIP Audio products
• VoIP trunk - How to setup with IP phone
• Configuration backup - How to backup a configuration and how to capture a trace for 2N SIP Speaker (Horn)
• Web scheduler - How to work with 2N IP Audio Web Scheduler
• iOS 14 & macOS Big Sur - Issues with accessing website
• Factory reset - How to make a factory reset for 2N Net Audio devices
• Remote Control - How to make it work with 2N Net Audio Decoder?
• Yealink IP Phone SIP-T26P vs. 2N SIP Audio Converter - Sending and receiving multicast
• How to provide all information to effectively resolve a technical issue on SIP Audio
• Factory reset - How to make a factory reset
• How to provide all information to effectively resolve a technical issue
• Loudspeaker - How to properly connect loudspeaker
• Scheduler - How to use Announcement Scheduler
• My SIM in Omega card does not log into network. Why?
• Factory reset - How to make a factory reset VBM EN
• SMS at no answer - How to set "SMS at no answer" on 2N VoiceBlue MAX
• 2N SIM Star shows a low ACD value
• How to change the password of VPN connection for MikroTik?
• 2N SIM Star shows a low ASR value
• Configuration - How do I configure 2N VoiceBlue Lite?
• Credit check - How can I recognize an amount of credit on my SIM card?
• Call disconnection - What to do if a call is not ended immediately?
• Call routing - How many simultaneous calls can I do?
• Configuration Tool Download
• Firmware - Can I use firmware 03.00.xx?
• Grandstream GXV3240 - How to set it up with a 2N IP Intercom
• Grandstream GXV3275 - How to set it up with 2N IP Intercom
• Grandstream GXV3140 - How to set it up with a 2N IP Intercom
• Firmware update – How to do FW update or factory reset of 2N Indoor Touch 2.0
• Display customization of 2N IP Style
• Automation, Silent Alarm - How to configure silent alarm on 2N IP Intercoms
• 2N Meeting Room user guide
• Offline Bluetooth pairing and modes (Tap In App, Touch On Device, Card, Motion Detection)
• Connectors and LED in 2N LTE Verso
• 2N LTE Verso - How to perform factory reset
• Multicast Stream configuration with IP Audio Manager
• Static IP address - How to set up static IP address for 2N SIP Audio products
• Output relay - How to use it?
• IP address - How to setup static / dynamic IP address
• 2N IP audio unit can not connect to the 2N® IP Audio Manager - what could be the reason?
• IP Address - How to find the IP address of the 2N SIP Mic
• How to backup database of 2N SIP Mic
• Grandstream GXV3175v2 - How to set it up with a 2N IP Intercom
• Integration the Grandstream HT801 with 2N IP Intercom
• Unit share - Is it possible to share one Machine room unit for more shafts?
• phone-line-compatibility-2n-lift1-2n-lift8-a-2n-lift-ip
• user-message-how-to-record-and-upload-user-message-to-2n-lift1-communicator
• Problem with opening a configuration in service tool for LIft 8
• Extending switch - How many switches could be connected to 2N SingleTalk?
• External LEDs - How to connect/disconnect external LED diods of 2N Lift1 car unit
• extending-cancel-input-how-to-use-cancel-input
• Configuration backup - How to backup configuration and how to capture a trace - 2N Lift8
• External LEDs - How to connect/disconnect external LED diods of 2N Lift8 car unit
• Sending SMS upon input trigger
• Deleting 2N EasyGate IP from 2N Elevator Center
• Factory reset - How to make a factory reset on 2N Lift1
• Calling through the My2N SIP Proxy will enable you to call between devices listed in your My2N account
• Factory Reset - Easy Gate IP
• 2N Lift1 - Configuration backup - How to backup configuration, how to capture it and trace it
• 2N SingleTalk - Wont hang up automatically - What to do, if it wont hang up automatically?
• Connecting 2N SingleTalk via Well ATA-172P converter to VoIP server
• Factory-resetting-the-2N-LiftIP
• 4 lifts connected to single 2N Lift8 Central Unit without any additional splitters
• Factory-reset-How-to-make-a-factory-reset-on-2N-Lift8
• Factory reset on 2N LiftGate
• Setting up direct call betwenn 2N LiftIP with an external IP camera (Revotech) and IP phone (Grandstream GXV3275)
• Firmware upgrade - How to make a firmware upgrade on 2N Lift1
• How to make a firmware upgrade on 2N Lift8
• 2N SingleTalk - Difference between basic and full version - What is the difference between basic and full version of 2N SingleTalk?
• Setting up a call between 2N LiftIP / Lift8 with VoIP module and 2N VoiceBlue Next gateway
• Grounding-How-to-ground-2N-SingleTalk
• Upgrading-firmware-on-2N-LiftIP
• Firmware-upgrade-How-to-make-firmware-upgrade-on-2N-EasyGate-IP
• Providing technical information to effectively resolve a technical issue on 2N Lift1
• Hardware versions - Difference between 2N Lift1 HW version 1 and 2N Lift1 HW version 2
• Acquiring-IP-address-of-lift-communicator-2N-LiftIP
• How to add the Easy Gate IP to the 2N Elevator Center - FAQ_Lift_private
• Adding 2N LiftGate to the Elevator Center
• How to get ip address - Lift 8
• Calling between 2N LiftIP and IP Phone
• Sending SMS upon input trigger on EasyGate IP
• SMS programming - How to configure 2N Lift8 over SMS messages
• Using configuration templates in 2N Elevator Center
• Static-IP-address-How-to-set-up-static-IP-address-on-2N-Lift8
• Providing all information to effectively resolve a technical issue on 2N Lift8
• Setting up static IP address on 2N LiftIP
• Functionality-of-the-P100-Protocol-in-2N-Lift-Products
• RMA - What to check before the RMA process for 2N Lift8
• Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8004-VE
• What to do if a 3rd party app is displayed in portrait mode on 2N Indoor Touch?
• Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8105-E
• Axis camera in 2N Indoor Touch
• Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8207-VE
• What to check if the FW update on a 2N Indoor Touch is failing?
• How to do FW update or factory reset of 2N Indoor Touch?
• Factory setting (Default factory settings) - How to setup a Factory setting in 2N Indoor Touch
• How to control 2N Indoor Touch via Automation of 2N IP intercom
• Configuring email notification on 2N indoor Touch
• MicroSD card - List of tested 3rd party MicroSD cards
• Disabling the video preview with the 2N IP intercom outside the call?
• How to get network trace and logs from the 2N Indoor Touch
• Multicast Discovery - What is it good for
• HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
• How to provide all information to effectively resolve a technical issue with 2N Indoor Touch
• Video - My2N & 2N Indoor Touch - how to configure local or cloud calling
• SIP Proxy registration on Answering Units with 2N OS
• What LAN/Wi-Fi infrastructure do I need for 2N Indoor Touch installation?
• Sensitivity - Access_private
• SMS at no answer - How to setup "SMS at no answer"?
• How to report a technical issue with the 2N VoiceBlue MAX
• Static IP address - How to set up static IP address VoiceBlueMax
• Test call - How to make a test call from Softphone to 2N VoiceBlue MAX
• What are the methods of sending and receiving SMS messages using 2N BRI Lite and 2N BRI Enterprise?
• 2N NetStar SW - How to install and license 2N NetStar SW
• How to provide all information to effectively resolve a technical issue on 2N NetStar SW?
• The SIM cards do not assign or not log in GSMs view on 2N SIM Star
• The simulation of incoming calls with 2N SIM Star Server does not work
• Audio - What to check if I have voice quality issue?
• Database - How to backup database of 2N IP Audio Manager
• 2N Net Audio Encoder - how to setup and use
• Recording your own user message for 2N Lift8
• Upgrading splitter from 1.x.x to 2x.x on Lift 8
• Firmware update - How to do firmware update for 2N Net Audio devices
• Internet Radio - How to set up
• Video - 2N IP Audio system - MicroSD card usage
• Scheduler - How to set up
• 2N IP Audio Control Panel setting
• RMA - What to check before the RMA process for 2N Lift1
• volume-control-how-to-increase-or-decrease-volume-of-2n-lift8-car-unit
• RMA - What to check before the RMA process for 2N LiftIP
• RMA - What to check before the RMA process for 2N analog Intercoms
• Registration of 2N Lift8 to 2N OfficeRoute
• SIP calling using My2N
• Video - 2N Net Mic - Introduction & setup
• Configurating 2N Lift1 via SMS in combination with 2N EasyGate Pro
• Video - 2N IP Audio system - Basic setting
• Troubleshooting - How to troubleshoot an issue on 2N Lift products (ST)
• Calling between 2N Lift8 and IP Phone via VoIP module
• VPN connection on LiftGate
• 2N Net Audio Decoder - Channels - What is the purpose of CHANNELS in and how to set it up?
• Video - 2N Indoor Touch 2.0 - Setting up calls between 2N Indoor Touch 2.0 and 2N IP intercoms
• Video - 2N IP Verso - Flush frame installation - plasterboard
• Video - 2N OS devices - Factory Reset procedure
• Connection and configuration of a door contact to 2N IP Intercom/Access Unit
• My2N App Offline Pairing - Opening doors via Bluetooth
• 2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
• RFID Card/RFID Tag Configuration
• Web interface of 2N Indoor Touch is slow
• Video - 2N IP Intercom - How to switch between internal and external cameras using DTMF
• 2N 2Wire - Installation and Configuration
• Video - Configuration of 2N IP intercom with 2N IP Eye
• Video – 2N IP Base - surface installation guide
• Video - 2N IP Verso - Flush frame installation - brickwall
• Video - 2N IP intercoms - Calling multiple destinations in sequence and in parallel by pressing one button
• SIP Proxy registration on IP intercoms
• Wiegand interface Configuration in 2N Intercom
• Card reader gets stuck
• Registration of LTE Verso to My2N and basic setup
• 2N Student Monitoring System with 2N IP Intercoms
• 2N Network Scanner - Locating 2N devices in the network
• APS reader - Connection of lock and card reader (APS) including jumper configuration to 2N IP Vario
• Automation, 2FA - How to configure 2FA on 2N IP Intercoms
• Access credentials - How to add them to 2N device?
• Automation, Call Delay - how to set a different ring time for diferent call destinations
• Automation, Callback - How to configure callback with 2N IP Intercom to My2N
• Automation, Card Call - Initiating a call after card verification
• Automation, Black/whitelist - How to block or allow specific numbers to call an intercom
• Automation, Multicast - Configuring Lock/Unlock all feature on 2N IP Intercoms
• Automation, DoorOpenTooLong - Securing door against excessively long opening on 2N IP Intercoms
• How to send/receive separate multicast streams on 2N IP Intercoms via Automation
• Virtual Card ID
• 2N IP Intercoms - Diagnostics and Troubleshooting
• Automation, one-time access - How to set up one-time codes with automation
• Automation, OpenDoor - Controling the card reader signalization
• Automation, UnauthorisedDoorOpen - Securing doors against unauthorised door opening in 2N IP Intercoms
• Auto Provisioning via TFTP
• 2N IP intercoms, Access Units, IP audio units - Firmware upgrade
• 2N IP Intercoms - External IP camera connection (Axis IP camera guide included)
• Using Group Authentication / Access key in 2N Indoor Touch 2.0
• Certification for web authentication
• Connection of 2 devices to one lock
• Door section - configuration on the 2N IP Intercoms
• Electric locks in 2N IP Intercom accessories
• 2N IP Intercoms - IP Address retrieval
• Upload a video to display on 2N IP Intercom
• Induction loop for 2N IP Intercoms and Answering units
• External USB RFID reader 125kHz EMarine - Usage without any additional driver
• Static IP address in 2N IP Intercoms
• Tamper switch - Location (installation) and configuration
• SIP Proxy registration
• Virtual Numbers and Telephone Mode
• Access key - How to configure on the Indoor Touch
• Avaya - How to interconnect with Avaya Aura Communication Manager using SIP
• Alcatel OXO - How to interconnect with Alcatel OXO 7?
• Asterisk - How to interconnect with Asterisk?
• 3CX - How to interconnect with 3CX?
• SMS messages - How to configure Email2SMS and SMS2Email features with Windows Live Mail?
• 2N VoiceBlue Next - How to set? (version 1.19 and lower)
• 2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
• HiPath 3000 - How to interconnect with Siemens HiPath 3000?
• SMPP connection - How to connect ActiveXperts SMPP server
• Innovaphone PBX (IP302) - How to interconnect with Innovaphone PBX (IP302)?
• SMS messages - How to configure Email2SMS and SMS2Email features with Microsoft Outlook for VBN?
• AutoCLIP routing - How to set AutoCLIP routing?
• Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
• Audio - What to check if You can't hear the ring-back tone?
• Callback - How to set Callback on ViceBlue Next?
• Audio - What to check if you have voice quality issue?
• IP setting - How to find out the IP address?
• Licenses on VoiceBlue Next - Detailed information
• Credit - How can I check balance on my SIM card? (USSD commands usage)
• SMS messages - How does "messaging control" work on VoiceBlue Next (SMS queues)?
• Mobility Extension - How to set Mobility Extension on VoiceBlue Next?
• SIM card logging - What to check if SIM cards do not log into network?
• Update of the system
• SSH - How to connect over SSH to 2N Access Commander
• Management over the Internet
• Occupancy Management in 2N Access Commander
• QR code creating and sending over e-mail
• Starting manual for integration with 2N IP Intercoms
• Unlock buttons - Configuration in 2N Answering Units
• 2N IP Audio Kit Lite - Button does not work
• 2N IP Vario - Reseting issue resets to default values after power supply reset
• External IP Relay 9137410E & 9137411E - Controlling using HTTP commands from a 2N IP intercom or 2N Access Unit
• Door lock does not open after dialing 00
• 2N IP Eye issue - How to enable 2N IP Eye in Windows firewall?
• Intergration Loxone Miniserver with 2N intercom
• Keypad issue with 2N IP Vario - some keys do not work
• 2N IP Intercoms - User sounds uploading
• 2N IP Intercoms - Factory reset
• Setting up Grandstream GXV3672 for external camera for 2N IP Intercom
• Setting up 2N IP Intercom with SNOM 760 phone
• Milestone XProtect and 2N IP Intercom integration
• MicroSIP - Direct call with 2N IP Intercom
• Visitors management & Simplified user interface
• SSL / TLS - CA certificate - How to add certificate authority to Linux of 2N Access Commander
• Vega LPR integration with 2N IP Intercoms and Access Units
• Firmware compatibility across 2N Access Commander versions
• Time Profiles
• Password recovery in 2N OS devices
• VLC media player - watch and record video from 2N IP Intercom
• Video issue - 2N IP Intercom does not send video during a call
• Connecting WaveStore VMS to 2N IP Intercom
• Wiegand interface - Function overview
• Milestone XProtect - How to add, monitor and control door units stored in 2N Access Commander
• Milestone XProtect Smart Client - log operator's actions
• Milestone XProtect - How to display video tracks and event information surrounding an access by a user from 2N Access Commander
• Reports - what data are exported
• Configuring Wildix VoIP PBX with 2N IP Intercom
• SMTP and notifications - How to set in 2N Access Commander
• Video - 2N Access Commander - Basic setup guide
• Camera settings guide for 2N IP Style
• Installation of virtual machine and Box solutions
• Backup and setting restore - 2N Access Commander
• Import of users from device
• Access Points - How to define access points in 2N Access Commander
• Anti-passback - How to configure in 2N Access Commander
• Attendance and Presence - How to configure in 2N Access Commander
• Troubleshooting of issue with 2N Access Commander
• Diagnostics logs
• Which devices can be connected - 2N Access Commander
• Milestone integration - How to setup with 2N Access Commander
• Automatic startup of 2N Access Commander BOX after a power outage
• Bluetooth authentication - How to configure it in 2N® Access Commander
• Beta testing
• Factory reset of the 2N Access Commander Box
• CSV Import of users with their details
• CSV Synchronization - import / remove / update users and user's details
• Dashboard and widgets in 2N Access Commander
• Display - How to set up display of a device in 2N Access Commander
• External USB readers - Driver installation & usage
• HTTP REST API
• Migrate configuration from old installation to new one (the same version)
• Lockdown feature in 2N Access Commander
• SMTP Gmail service configuration in 2N Access Commander
• Time settings - How to configure in 2N Access Commander
• Keyboard layout - How to set different keyboard layout in Linux of 2N Access Commander
• LDAP - Users synchronisation from a remote directory
• Licensing since the version 2.0 in 2N Access Commander
• Static IP address - How to set up static IP address in 2N Access Commander
• Visitors management - Manage visits in 2N Access Commander
• SSL / TLS - User certificate - How to add CA signed user certificate to 2N Access Commander web
• Virtualization (VT-x/AMD-V) enabling on your computer
• License Plate Recognition (LPR)
• Visitors in My2N – How to create visitors
• Configuration of the switch codes on the My2N Cloud
• How to integrate 2N IP Devices with MS Teams
• My2N/KONE integration
• Installation and Configuration of Lift8 for Multiple Shafts
• Web interface access - 2N IP intercoms
• Enforcer corner IP Camera - 2N Sentrio / LiftIP 2.0
• My2N - Low audio issue
• Lift 8 Configuration for Multiple Shafts
• 2N IP phone D7A - upgrade to 2N FW version 150.86.57.8
• How to add Japanese language on IP Style Display (as a custom language)
• I want to start using the My2N app instead of Mobile Key, but I do not see the „+“ icon in the My2N app to start the PIN pairing flow, what should I do?
• New Site models - Differences and Examples
• Easy Gate IP Battery reset
• Apartment admin - Guest access
• Device Security - Certificate Validation feature
• Compatibility Mode in Access Commander
• Milestone XProtect - Alarm event from 2N device on Milestone XProtect
• My2N app access - How to set it up
• Bluetooth Motion Mode - how to setup My2n App and use the feature
• Offline Pairing - How to set it up
• Bluetooth Tap in App Mode - how to setup My2n App and use the feature
• Bluetooth Card Mode - how to setup My2n App and use the feature
• Bluetooth Touch Mode - how to setup My2n App and use the feature
• Automation (Node-RED) in Access Commander
• How to add Japanese language on 2N Indoor View Display (as a custom language)
• How to add Japanese language on 2N Clip Display (as a custom language)
• Capture network and logs - Lift IP 2.0
• How to make an a update - Lift IP 2.0
• Factory reset - Lift IP 2.0
• Download Configuration - Lift IP 2.0
• My2N apartment Admin Features
• Troubleshooting basics – Configuration backup, network trace, syslog and ping tool on 2N IP Intercoms
• I have a mobile with Android version 8 or 9 and want to use my2n App
• Lift IP 2.0 factory reset
• Multifactor Authentication (MFA) - How to enable and use it in My2N Platform
• Two-factor (2FA) authentication in 2N Access Commander
• Installation name of 2N Access Commander
• Download configuration backup in 2N Sentrio
• Capture network traces in Sentrio
• 2N Fortis - mechanical assembly and disassembly
• My2N and Apple watch
• My2N platform and 3rd party SIP calls
• My2N App on AppleWatch Access via complications (widgets)
• How to install 2N Clip 2Wire-IP
• SIP over UDP Support Ending in November 2025
• API opening - how to activate Access Units switches from the App
• IP Sentrio - Factory reset
• Firmware upgrade for IP Sentrio
• Alarm1_2 and Long_Alarm2_setting
• External Axis IP camera connection to LiftIP 2.0
• Sizes of Spindle and Cylinder for project
• Dormakaba - My Dormakaba lock stopped working - What can you check?