2N
Menu
ENG

2N® Induction Loop

2N® Induction Loop wirelessly transmits sound from the 2N IP intercom to the affected person’s hearing aid. A hearing impaired visitor to the building thus gets the benefit of voice communication. By installing the induction loop at the door you meet not only the necessary standards, but facilitate the hearing aid wearer’s communication e.g. with the reception desk.

  • Audio transmission to hearing aids
  • Simple connection to the 2N IP intercom
  • Built-in antenna
Request information Where to Buy
5-Year Warranty
About

Features & Benefits

  • Audio transmission to hearing aids
    Communicate with hearing impaired persons. The induction loop transmits sound to all standard hearing aids in accordance with the IEC 60118-4 standard.
  • Simple connection to the 2N IP intercom
    Connect any 2N IP intercom to the induction loop. Thanks to the special-purpose connector, you won’t have to configure anything.
  • Built-in antenna
    The induction loop has a built-in antenna, which covers the area in front of it with a signal for listening devices.
  • Suitable for outdoor use
    With its IP65 standard compliance, the inductive loop is weather-resistant and therefore suitable for outdoor use.
  • Standby mode
    When there is no audio signal the inductive loop automatically switches to energy-saving mode.
  • Easy fitting
    The 2N® Induction Loop easily mounts to the wall with 2 screws. You then connect one cable to the signal source and the other to the power feed.
  • Arbitrary audio input
    With the induction loop, you can make use of any signal source, e.g.. IP intercoms, lift communicators, etc.
  • Adjustable volume
    The induction loop output volume level can be adjusted to suit where you install it.
Show more

Technical Parameters

Power supply
Power-supply voltage: 8-18V DC
Supply current for 12V power supply: 1Ω load on full power: 1.4A sinusoid signal; 1A pink noise signal 8Ω load, half power: 550mA, sinusoidal signal; 400mA pink noise signal without signal: 100mA standby: max 10mA
Transition to standby without signal: 10s
Input level baseline: 100mV – 6 Vef
Input level elevated: 1V – 35 Vef
Impedance at source: 2kΩ parallel with 0.3H
Output current, 1Ω load: 2.2 Aef (sinusoidal) full power: 1.6 Aef (pink noise)
Output current, 8Ω load: 730 mAef sinusoidal signal half power: 520 mAef pink noise signal
Mechanical properties
Output short-circuit resistance: time-unlimited
Frequency response: 100Hz – 5kHz ∓ 3dB
Temperature range: -4°F – 122°F
Ingress Protection: IP65
Dimensions: 5.669 × 3.937 × 1.220 inch
Weight 0,3kg
Show more

2N® Induction Loop Versions

2N® Induction Loop with 2N IP Intercoms Connector Order No.: 01391-001
All Solutions

Complementary Products

2N® IP Style A true gamechanger - sleek and secure with an eye-catching 10’’ display. Learn more
2N® IP Verso 2.0 Harder, better, faster, stronger Learn more
2N® IP Verso A versatile modular IP intercom in a luxurious finish Learn more
2N® IP Force The 2N IP Force is the toughest in the world – a perfectly secure gate intercom Learn more
2N® IP Safety A sturdy IP intercom perfect for emergency situations Learn more
2N® Indoor View A stylish indoor station with a 7″ HD touchscreen Learn more
2N® Indoor Compact Compact but clever – an indoor station with intuitive controls Learn more
2N® Indoor Talk An elegant indoor station with crystal-clear HD sound Learn more

Where to Buy

You can purchase these products from our authorised distributors.
Locate a distributor
Technical area

Documents

Technical documentation
Marketing materials
Software & firmware

Case Study

Example of Typical Connection

FAQ

Are you still looking for more information? Check out the frequently asked questions and answers.
See more

Technical Parameters

Power supply
Power-supply voltage: 8-18V DC
Supply current for 12V power supply: 1Ω load on full power: 1.4A sinusoid signal; 1A pink noise signal 8Ω load, half power: 550mA, sinusoidal signal; 400mA pink noise signal without signal: 100mA standby: max 10mA
Transition to standby without signal: 10s
Input level baseline: 100mV – 6 Vef
Input level elevated: 1V – 35 Vef
Impedance at source: 2kΩ parallel with 0.3H
Output current, 1Ω load: 2.2 Aef (sinusoidal) full power: 1.6 Aef (pink noise)
Output current, 8Ω load: 730 mAef sinusoidal signal half power: 520 mAef pink noise signal
Mechanical properties
Output short-circuit resistance: time-unlimited
Frequency response: 100Hz – 5kHz ∓ 3dB
Temperature range: -4°F – 122°F
Ingress Protection: IP65
Dimensions: 5.669 × 3.937 × 1.220 inch
Weight 0,3kg
Show more

Register for Technical Training

View our technical training courses. Choose the one that suits you best.
See more
Accessories

Power Supply

Power Supply for 2N® Induction Loop Order No.: 01393-001 Learn more
SW Applications
Sales Area

Selling Propositions

  • Audio transmission to hearing aids
    Communicate with hearing impaired persons. The induction loop transmits sound to all standard hearing aids in accordance with the IEC 60118-4 standard.
  • Simple connection to the 2N IP intercom
    Connect any 2N IP intercom to the induction loop. Thanks to the special-purpose connector, you won’t have to configure anything.
  • Built-in antenna
    The induction loop has a built-in antenna, which covers the area in front of it with a signal for listening devices.
  • Suitable for outdoor use
    With its IP65 standard compliance, the inductive loop is weather-resistant and therefore suitable for outdoor use.
  • Standby mode
    When there is no audio signal the inductive loop automatically switches to energy-saving mode.
  • Easy fitting
    The 2N® Induction Loop easily mounts to the wall with 2 screws. You then connect one cable to the signal source and the other to the power feed.
  • Arbitrary audio input
    With the induction loop, you can make use of any signal source, e.g.. IP intercoms, lift communicators, etc.
  • Adjustable volume
    The induction loop output volume level can be adjusted to suit where you install it.
Show more

2N® Induction Loop Versions

2N® Induction Loop with 2N IP Intercoms Connector Order No.: 01391-001

Technical Parameters

Power supply
Power-supply voltage: 8-18V DC
Supply current for 12V power supply: 1Ω load on full power: 1.4A sinusoid signal; 1A pink noise signal 8Ω load, half power: 550mA, sinusoidal signal; 400mA pink noise signal without signal: 100mA standby: max 10mA
Transition to standby without signal: 10s
Input level baseline: 100mV – 6 Vef
Input level elevated: 1V – 35 Vef
Impedance at source: 2kΩ parallel with 0.3H
Output current, 1Ω load: 2.2 Aef (sinusoidal) full power: 1.6 Aef (pink noise)
Output current, 8Ω load: 730 mAef sinusoidal signal half power: 520 mAef pink noise signal
Mechanical properties
Output short-circuit resistance: time-unlimited
Frequency response: 100Hz – 5kHz ∓ 3dB
Temperature range: -4°F – 122°F
Ingress Protection: IP65
Dimensions: 5.669 × 3.937 × 1.220 inch
Weight 0,3kg
Show more

Documents

Technical documentation
Marketing materials
Software & firmware

Similar Products

Project Consulting Do you need help with a project? Trust our experts to assist you. Learn more
Request information