2N Access Unit M
The 2N Access Unit M is the ideal reader for offices. Its controller is built-in and all you need to connect and power the device is a single UTP cable. Thanks to its compact design, you can easily install the unit on a door frame. Choose from several versions – RFID, RFID combined with mobile access via Bluetooth, or RFID with a keypad, which is perfect for projects that require two-factor authentication. Show in 3D
- Slimline design
- Fastest mobile access
- Controller and reader in one
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Slimline designThe reader’s slimline design is ideal for installation on the door frame at the entrance to a meeting room. However, it will come in handy wherever you’re short on space.
-
Fastest mobile accessWith our WaveKey Bluetooth technology, users only need 0.3 of a second to gain access. What’s more, this is the securest method of access on the market.
-
Controller and reader in oneDon’t worry about looking for a place to put the controller plus save on cabling. Our reader has full smart technology built in. In addition, it works without the need to communicate with a server.
-
Perfect for the office or outdoorThe glass front panel will be scratch-free even after five years of daily use. With an IP55 protection coverage, you can install the reader outside. Despite all this, the units remain affordable.
-
Quick installationInstall the reader in 4 minutes. Drill three holes in the frame, feed through the UTP cable, connect the lock and screw it in place. It couldn’t be any quicker.
-
Encrypted two-way communicationThe reader securely communicates with the web interface, with 2N® Access Commander administration software and the 2N® Mobile Key mobile application.
Show more
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE: | 802.3af (Class 0–12.95 W) |
| LAN: | LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail) |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12 V DC/max 600 mA |
| Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
| OFF = open or Uin> 1.5 V | |
| ON = short-circuit or Uin< 1.5 V | |
| Tamper switch: | native part of the 2N Access Unit M |
| Audio: | buzzer, 1 W/8ohm |
| Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth | |
| Version: | compatible with Bluetooth 5.0 LE |
| Range: | (short - typically up to 9 ft*, long - typically up to 30 ft*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: Mode: |
up to 94.8 dBm touch, tap in app |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies: | 13.56 MHz variant |
| 125 kHz and 13.56 MHz variant | |
| 125 kHz: | EM4100, EM4102 |
| 13.56 MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| Touch Keypad | |
| Technology: | capacitive touch technology |
| high touch layer sensitivity (0.1pF) | |
| Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
| does not detect false touches on wet surface | |
| Signalling: | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
| Mechanical Properties | |
| Cover: | tempered glass with durable plastic |
| Operating temperature: | -40°F to + 140°F |
| Storage temperature: | -40°F to +158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions (surface mounted): | 1.969 (W) x 5.236 (H) x 1.063 (D) inch |
| Weight: | max 1,1 pounds |
| Cover rating: | IP55 and IK07 |
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Typical Usage
All you need to know about the 2N Access Unit M in 3 minutes
Watch the video Technical area 
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE: | 802.3af (Class 0–12.95 W) |
| LAN: | LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail) |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12 V DC/max 600 mA |
| Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
| OFF = open or Uin> 1.5 V | |
| ON = short-circuit or Uin< 1.5 V | |
| Tamper switch: | native part of the 2N Access Unit M |
| Audio: | buzzer, 1 W/8ohm |
| Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth | |
| Version: | compatible with Bluetooth 5.0 LE |
| Range: | (short - typically up to 9 ft*, long - typically up to 30 ft*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: Mode: | up to 94.8 dBm touch, tap in app |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies: | 13.56 MHz variant |
| 125 kHz and 13.56 MHz variant | |
| 125 kHz: | EM4100, EM4102 |
| 13.56 MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| Touch Keypad | |
| Technology: | capacitive touch technology |
| high touch layer sensitivity (0.1pF) | |
| Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
| does not detect false touches on wet surface | |
| Signalling: | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
| Mechanical Properties | |
| Cover: | tempered glass with durable plastic |
| Operating temperature: | -40°F to + 140°F |
| Storage temperature: | -40°F to +158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions (surface mounted): | 1.969 (W) x 5.236 (H) x 1.063 (D) inch |
| Weight: | max 1,1 pounds |
| Cover rating: | IP55 and IK07 |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Slimline designThe reader’s slimline design is ideal for installation on the door frame at the entrance to a meeting room. However, it will come in handy wherever you’re short on space.
- Fastest mobile accessWith our WaveKey Bluetooth technology, users only need 0.3 of a second to gain access. What’s more, this is the securest method of access on the market.
- Controller and reader in oneDon’t worry about looking for a place to put the controller plus save on cabling. Our reader has full smart technology built in. In addition, it works without the need to communicate with a server.
- Perfect for the office or outdoorThe glass front panel will be scratch-free even after five years of daily use. With an IP55 protection coverage, you can install the reader outside. Despite all this, the units remain affordable.
- Quick installationInstall the reader in 4 minutes. Drill three holes in the frame, feed through the UTP cable, connect the lock and screw it in place. It couldn’t be any quicker.
- Encrypted two-way communicationThe reader securely communicates with the web interface, with 2N® Access Commander administration software and the 2N® Mobile Key mobile application.
Show more
Try out the 2N Project Designer
Simply enter your requirements and our intuitive project planning tool will help you choose the right products.
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE: | 802.3af (Class 0–12.95 W) |
| LAN: | LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 female (pigtail) |
| Recommended cabling: | Cat-5e or better |
| Active switch output: | 8 to 12 V DC/max 600 mA |
| Passive switch: | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs: | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
| OFF = open or Uin> 1.5 V | |
| ON = short-circuit or Uin< 1.5 V | |
| Tamper switch: | native part of the 2N Access Unit M |
| Audio: | buzzer, 1 W/8ohm |
| Supported protocols: | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth | |
| Version: | compatible with Bluetooth 5.0 LE |
| Range: | (short - typically up to 9 ft*, long - typically up to 30 ft*) *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment |
| Security: | RSA-1024 and AES-128 encryption |
| RX sensitivity: Mode: | up to 94.8 dBm touch, tap in app |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies: | 13.56 MHz variant |
| 125 kHz and 13.56 MHz variant | |
| 125 kHz: | EM4100, EM4102 |
| 13.56 MHz: | ISO14443A, ISO14443B, NFC support |
| reads UID (CSN) | |
| Touch Keypad | |
| Technology: | capacitive touch technology |
| high touch layer sensitivity (0.1pF) | |
| Reliability: | regular automatic calibration (SmartSence Auto-tunning) |
| does not detect false touches on wet surface | |
| Signalling: | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
| Mechanical Properties | |
| Cover: | tempered glass with durable plastic |
| Operating temperature: | -40°F to + 140°F |
| Storage temperature: | -40°F to +158°F |
| Operating relative humidity: | 10%-95% (non-condensing) |
| Dimensions (surface mounted): | 1.969 (W) x 5.236 (H) x 1.063 (D) inch |
| Weight: | max 1,1 pounds |
| Cover rating: | IP55 and IK07 |
Show more
