2N® Access Unit 2.0 RFID Multifrequency

Order number: 02146-001

Thanks to our own RFID chip, the 2N® Access Unit 2.0 RFID reads almost all cards on the market. Quickly, reliably and on both frequencies – 125 kHz and 13.56 MHz. This comes in handy when you don’t want to spend money on cards. Give users the option of using one of the cards they already have in their wallet. Installation will take you only a few minutes, all you need to do is connect an ethernet cable. Datasheets (US)

Request information

Technical Parameters
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies: 125 kHz and 13.56 MHz variant
Supported card types: card type compatibility depends on Order No.
125 kHz: EM4xxx
HID Prox
13.56 MHz: ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE)
reads UID (CSN) and secured MIFARE® DESFire® cards using 2N® PICard technology
reads PACs ID (HID iClass cards with SIO object)
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to + 140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Wall (surface) mounting frame: 1 module: 4,21 (W) x 5,11 (H) x 1,10 (D) inch
Flush mounting frame: 1 module: 5,11 (W) x 6,02 (H) x 0,19 (D) inch
Flush mounting box (minimum hole): 1 module: 4,25 (W) x 5,15 (H) x 1,77 (D) inch
Weight: max 1,76 pounds
Cover rating: IP54 and IK08
Show more