2N® Access Unit 2.0 Touch keypad, Bluetooth & RFID
Order number: 02777-001 (secured)
This versatile smart reader combines three access technologies in a single device and offers users maximum flexibility. Supplement the increasingly popular mobile access with backups such as PIN codes in case, for example, residents come home and their phone is out of battery. Traditionalists can still use RFID cards, which can also be encrypted using 2N® PICard technology. This is particularly useful in office projects. Datasheets (US)
- 3 access technologies in 1 reader
- Mobile access backed up by PIN
- Compatible with 2N® PICard technology
Technical Parameters
| Power supply | |
| Type | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX, RJ-45 jack |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 600 mA |
| Passive switch | NO/NC contacts, up to 30 V/1 A AC/DC |
| Inputs | 2 inputs - in passive/active mode (-30 V to +30 V DC) |
| OFF = open or Uin> 1.5 V | |
| ON = short-circuit or Uin< 1.5 V | |
| Tamper switch | native part of the 2N Access Unit 2.0 |
| Audio | buzzer (97dBA) |
| Supported protocols | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth Reader | |
| Version | compatible with Bluetooth 5.0 (BLE) |
| Range | (short - typically up to 9 ft*, long - typically up to 30 ft*) |
| *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
| Security | RSA-1024 and AES-128 encryption |
| RX sensitivity | up to -93 dBm |
| Mode | touch, tap in app, card |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies | 125 kHz variant |
| 13.56 MHz variant | |
| 125 kHz and 13.56 MHz variant | |
| Supported card types | card type compatibility depends on Order No. |
| 125 kHz | EM4xxx |
| HID Prox | |
| 13.56 MHz | ISO14443A (MIFARE® DESFire®), PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key), HID SE (Seos, iClass, MIFARE SE) |
| reads UID (CSN) and secured MIFARE® DESFire® cards using 2N® PICard technology | |
| reads PACs ID (HID iClass cards with SIO object) | |
| Touch Keypad | |
| Technology | capacitive touch layer (sensitivity 0,1 pF) |
| Reliability | regular automatic calibration (SmartSence Auto-tunning) |
| does not detect false touches on wet surface | |
| Signalling | configurable backlight intensity |
| indication using multicoloured LEDs | |
| acoustic response for every keypad touch | |
| Mechanical Properties | |
| Frame | robust zinc cast frame with surface finish (nickel and black color) |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Dimensions | Wall (surface) mounting frame: |
| - 1 module: 4,21 (W) x 5,11 (H) x 1,10 (D) inch | |
| Flush mounting frame: | |
| - 1 module: 5,11 (W) x 6,02 (H) x 0,19 (D) inch | |
| Flush mounting box (minimum hole): | |
| - 1 module: 4,25 (W) x 5,15 (H) x 1,77 (D) inch | |
| Weight | max 1,76 pounds |
| Cover rating | IP54 and IK08 |
| Extension Modules | |
| 2N Access Unit 2.0 supports modules from the 2N® IP Verso intercom: RFID, Bluetooth and fingerprint readers, keypad, I/O module, Wiegand, etc. | |
Show more