2N® Access Unit 2.0 Touch Keypad & RFID

Order number: 02775-001

Let the residents decide whether to remember a PIN code or carry an RFID card with them. You can even set the system to require both for access at night. Identification using a PIN code is also useful for one-off access. Does the heating in the building need to be inspected? The user can send the technician a one-off code for access to the utility room and leave it up to them when they come to do the job. Datasheets (US)

Request information

Technical Parameters
Power supply: PoE and/or 12 V/1 A DC
PoE: 802.3af (Class 0–12.95 W)
LAN: 10/100BASE-TX with Auto-MDIX, RJ-45 modular jack
Recommended cabling: Cat-5e or better
Active switch output: 8 to 12 V DC/max 600 mA
Passive switch: NO/NC contacts, up to 30 V/1 A AC/DC
Inputs: 2 inputs - in passive/active mode (-30 V to +30 V DC)
OFF = open or Uin> 1.5 V
ON = short-circuit or Uin< 1.5 V
Tamper switch: native part of the 2N Access Unit 2.0
Audio: buzzer (97dBA)
Supported protocols: DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
Touch Keypad
Technology: capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability: regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling: configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
RFID Card Reader
Supported frequencies: 125 kHz and 13.56 MHz variant
Supported card types: card type compatibility depends on Order No.
125 kHz: EM4100, EM4102
HID Prox - Secured version only
13.56 MHz: ISO14443A, ISO14443B, NFC support
reads UID (CSN)
reads PACs ID (HID iClass cards with SIO object) - Secured version only
Mechanical Properties
Frame: robust zinc cast frame with surface finish (nickel and black color)
Operating temperature: -40°F to +140°F
Storage temperature: -40°F to +158°F
Operating relative humidity: 10%-95% (non-condensing)
Dimensions: Wall (surface) mounting frame:
- 1 module: 4.2 (W) x 5.11 (H) x 1.10 (D) inch
Flush mounting frame:
- 1 module: 5.11 (W) x 6.02 (H) x 0.19 (D) inch
Flush mounting box (minimum hole):
- 1 module: 4.25 (W) x 5.15 (H) x 1.77 (D) inch
Weight: max 1.76 pounds
Cover rating: IP54 and IK08
Show more