2N® Access Unit M Bluetooth & RFID
Order number: 02911-001
The ideal reader for all modern offices. Employees safely open doors using their mobile phone with the 2N® Mobile Key app installed. They either do this by tapping a button in the app or leave the phone in their pocket and just tapping the reader. Our Bluetooth technology is the fastest and most secure access option on the market. And those who are not fans of modern technologies can open the door using any RFID card. Datasheets (US)
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX; RJ-45 male (9.5 ft pigtail) |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 600 mA |
| Passive switch | NO/NC relay, 30V 1A AC/DC |
| Inputs | 2 inputs – in passive / active mode(-30 VDC to + 30 VDC) |
| OFF = OPEN or Uin > 1.5 V | |
| ON = CLOSED or Uin < 1.5 V | |
| Tamper switch | native part of the 2N Access Unit M |
| Audio | buzzer, 1 W/8ohm |
| Supported protocols | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| Bluetooth Reader | |
| Version | compatible with Bluetooth 5.0 LE |
| Range | adjustable (short ~ 9 ft*, long ~ up to 30 ft*) |
| *distances should serve only as an approximate guide and may vary depending on the phone model and installation environment | |
| Security | RSA-1024 and AES-128 encryption |
| RX sensitivity | up to 94.8 dBm |
| Mode | card, touch, tap in app |
| Mobile Application Support | |
| Android 6.0 and higher, iOS 12.0 and higher | |
| RFID Card Reader | |
| Supported frequencies | 125kHz and 13.56MHz variant |
| 125 kHz | EM4xxx |
| 13.56 MHz | reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
| reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
| Mechanical Properties | |
| Frame | tempered glass with rugged plastic |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Dimensions | 1.97 (W) x 5.24 (H) x 1.06 (D) inch |
| Flush installation box: | |
| 1.57 (W) x 5 (H) x 2.68 (D) inch | |
| Surface mount box: | |
| 1.06 (W) x 5.28 (H) x 2.05 (D) inch | |
| Weight | max 1,1 pounds |
| Cover rating | IP55 and IK07 |
Show more