2N® Access Unit M RFID 13.56 MHz
Order number: 02909-001
This version of the 2N® Access Unit M RFID reader can read most cards at a frequency of 13.56 MHz. It is suitable for companies which prefer traditional RFID technology. The reader supports NFC technology, so employees who don’t want to wear a card can use their mobile phone to gain access. Administer a unit remotely via the secure web interface or in the 2N® Access Commander software. Datasheets (US)
Technical Parameters
| Interfaces | |
| Power supply: | PoE and/or 12 V/1 A DC |
| PoE | 802.3af (Class 0–12.95 W) |
| Interfaces | |
| LAN | 10/100BASE-TX with Auto-MDIX; RJ-45 male (9.5 ft pigtail) |
| Recommended cabling | Cat-5e or better |
| Active switch output | 8 to 12 V DC/max 600 mA |
| Passive switch | NO/NC relay, 30V 1A AC/DC |
| Inputs | 2 inputs – in passive / active mode(-30 VDC to + 30 VDC) |
| OFF = OPEN or Uin > 1.5 V | |
| ON = CLOSED or Uin < 1.5 V | |
| Tamper switch | native part of the 2N Access Unit M |
| Audio | buzzer, 1 W/8ohm |
| Supported protocols | DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog |
| RFID Card Reader | |
| Supported frequencies | 125kHz and 13.56MHz variant |
| 125 kHz | EM4xxx |
| 13.56 MHz | reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key) |
| reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology | |
| Mechanical Properties | |
| Frame | tempered glass with rugged plastic |
| Operating temperature | -40°F to + 140°F |
| Storage temperature | -40°F to +158°F |
| Operating relative humidity | 10%-95% (non-condensing) |
| Dimensions | 1.97 (W) x 5.24 (H) x 1.06 (D) inch |
| Flush installation box: | |
| 1.57 (W) x 5 (H) x 2.68 (D) inch | |
| Surface mount box: | |
| 1.06 (W) x 5.28 (H) x 2.05 (D) inch | |
| Weight | max 1,1 pounds |
| Cover rating | IP55 and IK07 |
Show more