2N® Access Unit M Touch Keypad & RFID

Order number: 02912-001

Great for projects with two-factor authentication. During working hours, employees swipe their RFID cards. Outside these hours, employees must also enter a PIN code. The reader is also great for scenarios when you generate one-off access codes for visitors. The keypad is backlit, so you can install it in dark places. The 2N® Access Unit M Touch Keypad & RFID can read cards with frequencies of 125 kHz and 13.56 MHz. Datasheets (US)

Request information

Technical Parameters
Power supply: PoE and/or 12 V/1 A DC
PoE 802.3af (Class 0–12.95 W)
LAN 10/100BASE-TX with Auto-MDIX; RJ-45 male (9.5 ft pigtail)
Recommended cabling Cat-5e or better
Active switch output 8 to 12 V DC/max 600 mA
Passive switch NO/NC relay, 30V 1A AC/DC
Inputs 2 inputs – in passive / active mode(-30 VDC to + 30 VDC)
OFF = OPEN or Uin > 1.5 V
ON = CLOSED or Uin < 1.5 V
Tamper switch native part of the 2N Access Unit M
Audio buzzer, 1 W/8ohm
Supported protocols DHCP opt. 66, SMTP, TFTP, HTTP, HTTPS, Syslog
RFID Card Reader
Supported frequencies 125kHz and 13.56MHz variant
125 kHz EM4xxx
13.56 MHz reads UID (CSN): ISO14443A, PicoPass (HID iClass), FeliCa, ST SR(IX), NFC (2N® Mobile Key)
reads secured MIFARE® DESFire® EV2/EV3 cards using 2N® PICard technology
Touch Keypad
Technology capacitive touch technology
high touch layer sensitivity (0.1pF)
Reliability regular automatic calibration (SmartSence Auto-tunning)
does not detect false touches on wet surface
Signalling configurable backlight intensity
indication using multicoloured LEDs
acoustic response for every keypad touch
Mechanical Properties
Frame tempered glass with rugged plastic
Operating temperature -40°F to + 140°F
Storage temperature -40°F to +158°F
Operating relative humidity 10%-95% (non-condensing)
Dimensions 1.97 (W) x 5.24 (H) x 1.06 (D) inch
Flush installation box:
1.57 (W) x 5 (H) x 2.68 (D) inch
Surface mount box:
1.06 (W) x 5.28 (H) x 2.05 (D) inch
Weight max 1,1 pounds
Cover rating IP55 and IK07
Show more