2N® LiftGate
The 2N® LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century. Plus, you needn’t worry if there’s a UTP cable in the elevator. IP connectivity in the elevator is secured using 2 wires in the travelling cable. 2N® LiftGate combines the functions of an LTE router, a backup power supply, a converter (2-wire to IP) and a switch all in one unit. Install just 1 product instead of 4 and save time and money.
This product is not sold through the Axis distribution network, please contact our representative by completing the form.
- IP connectivity over 2-wire
- Backup power supply
- All in one
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
Features & Benefits
-
IP connectivity over 2-wireInstall the 2N® LiftGate in the elevator machine room, a 2N® LiftGate Cabin Switch on the roof of the cabin and connect them via 2 wires in the travelling cable.
-
Backup power supplyEnsure emergency communication in the elevator even during power cuts. The 2N® LiftGate solution includes UPS to power critical communication equipment and emergency lighting.
-
All in oneYou no longer need a separate LTE router, switch, converter and backup power supply. 2N® LiftGate will perform all these functions for you. One certified product that saves you time and money.
-
Communication via SIM and WAN portYou only need one SIM card to make calls, for data communication with the gateway, the controller or access control system. A backup option can be provided in the form of a WAN port or second SIM.
-
Up to 4 IP devices in the cabinYou can connect an IP communicator, a camera, a display for ads or a reader to the 2N® LiftGate Cabin Switch. There’s even a backup 12 V output for emergency lighting.
-
Relay outputs and inputsHas the mobile network gone down? The 2N® LiftGate switches a relay, informs the controller, which changes the status of the elevator to out of service. However, relay outputs and inputs offer many more scenarios.
-
Connecting the machine room and the cabinConnect an elevator controller and IP telephone to 2N® LiftGate in the machine room. This meets the requirements of technical standards for shafts of more than 30 m and ensures communication between the machine room and the cabin.
-
Management via cloud and SMSConnect the IoT gateway to the 2N® Elevator Center in cloud to manage and monitor it remotely. Naturally, you can control the gateway and get notifications via SMS.
Technical Specification
2N® LiftGate – Main unit | |
Telephone network | |
GSM band: | EU (EGSM 900 MHz, GSM 1800 MHz) |
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz) | |
UMTS band: | EU (850/900/2100 MHz) |
US (850/1700/1900 MHz) | |
AU (850/900/1900/2100 MHz) | |
LTE band: | EU (B1, B3, B5, B7, B8, B20) |
US (B2, B4, B5, B12, B13, B14, B66, B71) | |
AU (B1, B3, B5, B7, B28, B40) | |
SIM cards: | 2 slots; (U)SIM, 1.8 / 3.0 V |
Antenna | |
Number: | Two inputs (Main an Diversity) |
Impedance: | 50 Ω |
Connector type: | F-SMA |
Ethernet | |
Interface: | 4x RJ-45, 1 Gbps (1x WAN, 3x LAN) |
PoE: | 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Inputs and outputs | |
Inputs: | 2 |
0 - 24 V (low level 0-2 V, high 4-24 V) | |
Outputs: | 2x relay (NO, NC, COM terminal block) |
max. 30 V / 1 A DC, 125 V / 0.3 A AC | |
Number of lines: | 2 |
Power supplyVoltage: |
100 – 230 V AC |
Frequency: | 50/60 Hz |
Input power: | 65 W |
(for 2x Cabin Switch) | |
Backup power supply: | built-in lead-acid battery, 12 V / 9 Ah (included) |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 10.62 x 9.44 x 3.14 inch |
IP protection: | IP20 |
Weight: | 10.36 lb with battery, 4.85 lb without battery |
2N® LiftGate – Cabin Switch | |
Connection to the main unit: | 2 wires |
Interface | |
Ethernet: | 4x RJ-45 port, 100 Mbps |
PoE: | 2x PoE 802.3af Class 0 (max 12,95 W) via LAN1 and LAN2 ports |
Output: | 12 V DC, 100 mA (for emergency lighting) |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 5.62 x 3.74 x 1.25 inch |
IP protection: | IP30 |
Installation: | Surface mounted on a wall or DIN rail |
Weight: | 0.44 lb |
Technical Specification
2N® LiftGate – Main unit | |
Telephone network | |
GSM band: | EU (EGSM 900 MHz, GSM 1800 MHz) |
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz) | |
UMTS band: | EU (850/900/2100 MHz) |
US (850/1700/1900 MHz) | |
AU (850/900/1900/2100 MHz) | |
LTE band: | EU (B1, B3, B5, B7, B8, B20) |
US (B2, B4, B5, B12, B13, B14, B66, B71) | |
AU (B1, B3, B5, B7, B28, B40) | |
SIM cards: | 2 slots; (U)SIM, 1.8 / 3.0 V |
Antenna | |
Number: | Two inputs (Main an Diversity) |
Impedance: | 50 Ω |
Connector type: | F-SMA |
Ethernet | |
Interface: | 4x RJ-45, 1 Gbps (1x WAN, 3x LAN) |
PoE: | 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Inputs and outputs | |
Inputs: | 2 |
0 - 24 V (low level 0-2 V, high 4-24 V) | |
Outputs: | 2x relay (NO, NC, COM terminal block) |
max. 30 V / 1 A DC, 125 V / 0.3 A AC | |
Number of lines: | 2 |
Power supplyVoltage: | 100 – 230 V AC |
Frequency: | 50/60 Hz |
Input power: | 65 W |
(for 2x Cabin Switch) | |
Backup power supply: | built-in lead-acid battery, 12 V / 9 Ah (included) |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 10.62 x 9.44 x 3.14 inch |
IP protection: | IP20 |
Weight: | 10.36 lb with battery, 4.85 lb without battery |
2N® LiftGate – Cabin Switch | |
Connection to the main unit: | 2 wires |
Interface | |
Ethernet: | 4x RJ-45 port, 100 Mbps |
PoE: | 2x PoE 802.3af Class 0 (max 12,95 W) via LAN1 and LAN2 ports |
Output: | 12 V DC, 100 mA (for emergency lighting) |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 5.62 x 3.74 x 1.25 inch |
IP protection: | IP30 |
Installation: | Surface mounted on a wall or DIN rail |
Weight: | 0.44 lb |
Register for Technical Training
Selling Propositions
- IP connectivity over 2-wireInstall the 2N® LiftGate in the elevator machine room, a 2N® LiftGate Cabin Switch on the roof of the cabin and connect them via 2 wires in the travelling cable.
- Backup power supplyEnsure emergency communication in the elevator even during power cuts. The 2N® LiftGate solution includes UPS to power critical communication equipment and emergency lighting.
- All in oneYou no longer need a separate LTE router, switch, converter and backup power supply. 2N® LiftGate will perform all these functions for you. One certified product that saves you time and money.
- Communication via SIM and WAN portYou only need one SIM card to make calls, for data communication with the gateway, the controller or access control system. A backup option can be provided in the form of a WAN port or second SIM.
- Up to 4 IP devices in the cabinYou can connect an IP communicator, a camera, a display for ads or a reader to the 2N® LiftGate Cabin Switch. There’s even a backup 12 V output for emergency lighting.
- Relay outputs and inputsHas the mobile network gone down? The 2N® LiftGate switches a relay, informs the controller, which changes the status of the elevator to out of service. However, relay outputs and inputs offer many more scenarios.
- Connecting the machine room and the cabinConnect an elevator controller and IP telephone to 2N® LiftGate in the machine room. This meets the requirements of technical standards for shafts of more than 30 m and ensures communication between the machine room and the cabin.
- Management via cloud and SMSConnect the IoT gateway to the 2N® Elevator Center in cloud to manage and monitor it remotely. Naturally, you can control the gateway and get notifications via SMS.
Certifications and Resistance
Technical Specification
2N® LiftGate – Main unit | |
Telephone network | |
GSM band: | EU (EGSM 900 MHz, GSM 1800 MHz) |
AU (EGSM 850/900 MHz, GSM 1800/1900 MHz) | |
UMTS band: | EU (850/900/2100 MHz) |
US (850/1700/1900 MHz) | |
AU (850/900/1900/2100 MHz) | |
LTE band: | EU (B1, B3, B5, B7, B8, B20) |
US (B2, B4, B5, B12, B13, B14, B66, B71) | |
AU (B1, B3, B5, B7, B28, B40) | |
SIM cards: | 2 slots; (U)SIM, 1.8 / 3.0 V |
Antenna | |
Number: | Two inputs (Main an Diversity) |
Impedance: | 50 Ω |
Connector type: | F-SMA |
Ethernet | |
Interface: | 4x RJ-45, 1 Gbps (1x WAN, 3x LAN) |
PoE: | 1x PoE 802.3af Class 2 (max 6.49 W) via the LAN1 port |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Inputs and outputs | |
Inputs: | 2 |
0 - 24 V (low level 0-2 V, high 4-24 V) | |
Outputs: | 2x relay (NO, NC, COM terminal block) |
max. 30 V / 1 A DC, 125 V / 0.3 A AC | |
Number of lines: | 2 |
Power supplyVoltage: | 100 – 230 V AC |
Frequency: | 50/60 Hz |
Input power: | 65 W |
(for 2x Cabin Switch) | |
Backup power supply: | built-in lead-acid battery, 12 V / 9 Ah (included) |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 10.62 x 9.44 x 3.14 inch |
IP protection: | IP20 |
Weight: | 10.36 lb with battery, 4.85 lb without battery |
2N® LiftGate – Cabin Switch | |
Connection to the main unit: | 2 wires |
Interface | |
Ethernet: | 4x RJ-45 port, 100 Mbps |
PoE: | 2x PoE 802.3af Class 0 (max 12,95 W) via LAN1 and LAN2 ports |
Output: | 12 V DC, 100 mA (for emergency lighting) |
Protocols: | IPV4, IPV6, ICMP, DNS, DHCP, NAT, HTTP, HTTPS, WS, NTP, OPENVPN, SYSLOG |
Mechanical properties | |
Operating temperature: | -4°F to +122°F |
Dimensions: | 5.62 x 3.74 x 1.25 inch |
IP protection: | IP30 |
Installation: | Surface mounted on a wall or DIN rail |
Weight: | 0.44 lb |