Show more
Hide
Show more
2N® SIP Mic
A SIP based microphone console for paging can appeal not only by wooden designer case, but also by various advanced functions such as broadcasting to 12 zones, two-way communication thanks to an inbuilt speaker, or playing back pre-recorded messages. All these functions are available without the need of server or distance limitations.
- Server-less paging to up to 12 zones
- Two-way communication
- Pre-recorded announcements
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Server-less paging to up to 12 zones2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
-
Two-way communicationCall from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
-
Pre-recorded announcementsUpload or record a message via the microphone and then play it by simple push of a button to a designated zone.
-
Easy configurationZones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
-
Integration with an AXIS solutionThe 2N® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix®, announcements can be made using AXIS cameras or speakers.
-
Easy installation with a single cableThe 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
-
Listen-in functionAt simple press of a button one can listen to what is happening in certain zone.
-
Support for IP PBX (SIP)The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
Show more
Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
Technical Parameters
| Audio parameters | |
| Audio stream: | SIP2.0, RTP multicast, VAPIX® |
| Audio codecs: | G.711u, G.722, L16 |
| Speakers: | 2 build-in, stereo, power output 2x2W, impedance 2x8 Ohm |
| Interfaces | |
| Logical inputs: | 2, galvanically separated, sensitive to contact or voltage from 5 to 48V |
| Relay output: | 1, galvanically isolated, NO and NC contact, max load 48V, 1A |
| Headphone output: | 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB |
| Primary microphone input: | symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB |
| Headset microphone input: | 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB |
| Line input: | 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB |
| Power supply | |
| External power supply: | 12 to 32V, power draw max. 1A |
| Power over Ethernet: | PoE to 802.3af standard |
| Mechanical properties | |
| Dimensions: | 8.228 x 2.559 x 5.63 inch |
| Operating temperature: | 32°F – 104°F |
| Buttons and labels | |
| Label dimensions: | 1.559 inch width x 0.354 inch height |
| Double button: | 1.102 inch x 0.551 inch |
| Single button: | 0.551 inch x 0.551 inch |
| Smal buttons: | 0.354 inch x 0.354 inch |
Show more
2N® SIP Mic Versions
2N® SIP Mic
Order No.:
01208-001
Typical Usage
Complementary Products
Technical area
Documents
Technical documentation
- HTTP API Manual (US) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker, 2N IP Access Control Units
- A&E Specifications - Intercoms, IP Access Units, Answering Units
- Installation Manual (EN) - 2N® SIP Mic
- Declaration of Conformity (EN) - 2N® SIP Mic
- Complete Product Support (EN) - 2N IP Audio Systems
Marketing documentation
-
2N Catalogue for Planners (US)
/documents/22902/1883270/catalogue_for_planners_us_lq.pdf
-
Product Leaflet (US) - 2N® SIP Mic
/documents/22902/1654677/sip_mic_leaflet_letter_us_lq.pdf
-
Product Presentation (EN) - 2N® SIP Mic
/documents/22902/1324774/sip_mic_product_presentation_en.pptx
-
Presentation (EN) - 2N SIP Audio System
/documents/22902/247602/sip_audio_system_presentation_en
Software & firmware
Case Study
Example of Typical Connection
FAQ
Are you still looking for more information? Check out the frequently asked questions and answers.
See more Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
Technical Parameters
| Audio parameters | |
| Audio stream: | SIP2.0, RTP multicast, VAPIX® |
| Audio codecs: | G.711u, G.722, L16 |
| Speakers: | 2 build-in, stereo, power output 2x2W, impedance 2x8 Ohm |
| Interfaces | |
| Logical inputs: | 2, galvanically separated, sensitive to contact or voltage from 5 to 48V |
| Relay output: | 1, galvanically isolated, NO and NC contact, max load 48V, 1A |
| Headphone output: | 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB |
| Primary microphone input: | symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB |
| Headset microphone input: | 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB |
| Line input: | 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB |
| Power supply | |
| External power supply: | 12 to 32V, power draw max. 1A |
| Power over Ethernet: | PoE to 802.3af standard |
| Mechanical properties | |
| Dimensions: | 8.228 x 2.559 x 5.63 inch |
| Operating temperature: | 32°F – 104°F |
| Buttons and labels | |
| Label dimensions: | 1.559 inch width x 0.354 inch height |
| Double button: | 1.102 inch x 0.551 inch |
| Single button: | 0.551 inch x 0.551 inch |
| Smal buttons: | 0.354 inch x 0.354 inch |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more SW Applications
Sales Area
Request information Selling Propositions
- Server-less paging to up to 12 zones2N® SIP Mic uses a multicast technology and sophisticated controlling mechanism hence enabling communication to up to 12 zones. Moreover, the microphone console- speaker connection is straight forward, no server needed.
- Two-way communicationCall from the 2N IP intercoms to the paging console with an inbuilt speaker thanks to SIP protocol.
- Pre-recorded announcementsUpload or record a message via the microphone and then play it by simple push of a button to a designated zone.
- Easy configurationZones, priorities and announcements prepared in advance can easily be set up in the clean web interface.
- Integration with an AXIS solutionThe 2N® SIP Mic microphone console is fully integrated into the AXIS Audio Manager central control software. Also, thanks to support for AXIS Vapix®, announcements can be made using AXIS cameras or speakers.
- Easy installation with a single cableThe 2N® SIP Mic is very easy to install simply by connecting it to an existing IP network with a PoE cable.
- Listen-in functionAt simple press of a button one can listen to what is happening in certain zone.
- Support for IP PBX (SIP)The 2N® SIP Mic device may function independently or be simply connected to IP PBX.
Show more
Compatibility with Global Technology Partners
Get to know the wide range of technologies which are compatible with our products.
2N® SIP Mic Versions
2N® SIP Mic Order No.: 01208-001
Technical Parameters
| Audio parameters | |
| Audio stream: | SIP2.0, RTP multicast, VAPIX® |
| Audio codecs: | G.711u, G.722, L16 |
| Speakers: | 2 build-in, stereo, power output 2x2W, impedance 2x8 Ohm |
| Interfaces | |
| Logical inputs: | 2, galvanically separated, sensitive to contact or voltage from 5 to 48V |
| Relay output: | 1, galvanically isolated, NO and NC contact, max load 48V, 1A |
| Headphone output: | 3.5mm jack, stereo, power output 2x30mW, min. load impedance of 16 Ohm, DR. 101dB, THD+N -85dB |
| Primary microphone input: | symmetric, XLR, integrated phantom power supply 24V, DR 88dB, THD+N -82dB |
| Headset microphone input: | 3.5mm jack, integrated power supply for electret microphones, DR 84dB, THD+N -78dB |
| Line input: | 3.5mm jack, mono or stereo non-symmetric stereo, DR 93dB, THD+N -82dB |
| Power supply | |
| External power supply: | 12 to 32V, power draw max. 1A |
| Power over Ethernet: | PoE to 802.3af standard |
| Mechanical properties | |
| Dimensions: | 8.228 x 2.559 x 5.63 inch |
| Operating temperature: | 32°F – 104°F |
| Buttons and labels | |
| Label dimensions: | 1.559 inch width x 0.354 inch height |
| Double button: | 1.102 inch x 0.551 inch |
| Single button: | 0.551 inch x 0.551 inch |
| Smal buttons: | 0.354 inch x 0.354 inch |
Show more
Documents
Technical documentation
- HTTP API Manual (US) - 2N IP Intercoms, 2N® SIP Audio Converter, 2N® SIP Speaker, 2N IP Access Control Units
- A&E Specifications - Intercoms, IP Access Units, Answering Units
- Installation Manual (EN) - 2N® SIP Mic
- Declaration of Conformity (EN) - 2N® SIP Mic
- Complete Product Support (EN) - 2N IP Audio Systems
Marketing documentation
- 2N Catalogue for Planners (US) /documents/22902/1883270/catalogue_for_planners_us_lq.pdf
- Product Leaflet (US) - 2N® SIP Mic /documents/22902/1654677/sip_mic_leaflet_letter_us_lq.pdf
- Product Presentation (EN) - 2N® SIP Mic /documents/22902/1324774/sip_mic_product_presentation_en.pptx
- Presentation (EN) - 2N SIP Audio System /documents/22902/247602/sip_audio_system_presentation_en
Software & firmware
