2N® EasyGate IP
The end of 2G and 3G networks is approaching. Transition seamlessly to modern 4G with the 2N® EasyGate IP. Connect an analogue elevator communicator to the gateway. This will ensure voice or data (VoIP) communication via a mobile network with an operations centre. If you are using an old mobile network for emergency communication, you can continue to do so. When you’re ready to transition to 4G, all you’ll need is a single click in settings. The gateway also supports VoIP (SIP) technology, which is the only technology to guarantee reliable transmission of a DTMF signal. For more information on how to order this product, please contact sales@2n.cz.
This product is not sold through the Axis distribution network, please contact our representative by completing the form.
- 3G and 4G support
- Reliable transmission of DTMF
- VoIP is the future
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
Features & Benefits
-
3G and 4G supportThe gateway supports 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
-
Reliable transmission of DTMF2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the elevator.
-
VoIP is the futureChange all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
-
For use in any elevator shaftA sturdy cover, operating temperature of up to 185°F, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any elevator shaft.
-
Backup operation using battery powerThe 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the elevator can always call for help and you will be in compliance with the legal standards.
-
Configuration in 2 minutesAny technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
-
Remote administration and monitoringWith our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the elevator communication market.
-
Variant with a modemSome elevator devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Technical Specification
Cellular network | |
4G LTE bands: | US (EC21-A): B2/B4/B12 |
UMTS/WCDMA bands: | US (EC21-A): 850/1700/1900 MHz |
GSM bands: | US (EC21-A): not supported |
SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
VoIP | |
Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
DTMF: | a) In-band |
Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
b) SIP INFO (RFC 2976) | |
DTMF signals are sent separately in the SIP message body | |
Antenna | |
Connector type: | SMA |
Impedance: | 50 Ohms |
Line interface | |
Interface type: | FXS with screw terminal blocks |
Power source | |
Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
Backup power: | 4×AA batteries, constantly monitored |
Configuration and upgrade | |
Local: | web UI over USB |
Cloud: | 2N® Elevator Center |
Other | |
Dimensions: | 7.7 x 4.7 x 2.4 in |
Weight: | 1.3 lb |
Humidity: | max 90%, non condensing |
IP coverage: | IP43 |
Operating temperature: | -40°F to +185°F |
Status LEDs: | power, cellular network, FXS line, data, signal strength |
Certifications: | FCC Part 15b |
UL 62368-1 | |
PTCRB | |
Technical Specification
Cellular network | |
4G LTE bands: | US (EC21-A): B2/B4/B12 |
UMTS/WCDMA bands: | US (EC21-A): 850/1700/1900 MHz |
GSM bands: | US (EC21-A): not supported |
SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
VoIP | |
Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
DTMF: | a) In-band |
Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
b) SIP INFO (RFC 2976) | |
DTMF signals are sent separately in the SIP message body | |
Antenna | |
Connector type: | SMA |
Impedance: | 50 Ohms |
Line interface | |
Interface type: | FXS with screw terminal blocks |
Power source | |
Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
Backup power: | 4×AA batteries, constantly monitored |
Configuration and upgrade | |
Local: | web UI over USB |
Cloud: | 2N® Elevator Center |
Other | |
Dimensions: | 7.7 x 4.7 x 2.4 in |
Weight: | 1.3 lb |
Humidity: | max 90%, non condensing |
IP coverage: | IP43 |
Operating temperature: | -40°F to +185°F |
Status LEDs: | power, cellular network, FXS line, data, signal strength |
Certifications: | FCC Part 15b |
UL 62368-1 | |
PTCRB | |
Register for Technical Training
Selling Propositions
- 3G and 4G supportThe gateway supports 3G and 4G networks with and mainly VoIP. Install the gateway already now and continue using the old network. When the time comes, you can switch to 4G.
- Reliable transmission of DTMF2G, 3G and VoLTE frequently distort the DTMF signal. Only VoIP technology using a SIP protocol guarantees reliable transmission of DTMF, which is essential for identification of the elevator.
- VoIP is the futureChange all your analogue devices for devices that support VoIP. Without a single change to the hardware in the cabin. You save on costs and the call will be crystal clear.
- For use in any elevator shaftA sturdy cover, operating temperature of up to 185°F, and IP43 protection against sprayed water. All this guarantees that the gateway can easily withstand adverse conditions in any elevator shaft.
- Backup operation using battery powerThe 2N® EasyGate IP works if there is a power cut. The backup battery can keep the gateway working. Users in the elevator can always call for help and you will be in compliance with the legal standards.
- Configuration in 2 minutesAny technician can easily set up the gateway, even without special expertise. Configuration is automated and takes no more than two minutes.
- Remote administration and monitoringWith our forthcoming 2N® Elevator Center cloud service, you’ll save on costs for call-outs for technicians. Look forward to the securest cloud solution on the elevator communication market.
- Variant with a modemSome elevator devices communicated via the PSTN network by modem. We have a version of the 2N® EasyGate IP gateway for installations like that too.
Technical Specification
Cellular network | |
4G LTE bands: | US (EC21-A): B2/B4/B12 |
UMTS/WCDMA bands: | US (EC21-A): 850/1700/1900 MHz |
GSM bands: | US (EC21-A): not supported |
SIM cards: | 2 slots, both support 3 V and 1.8 V SIM cards |
VoIP | |
Protocols: | SIP (RFC3261) over UDP, SIPs, SRTP |
DTMF: | a) In-band |
Analogy of traditional DTMF, where tones are merged with speech into single voice channel. | |
b) SIP INFO (RFC 2976) | |
DTMF signals are sent separately in the SIP message body | |
Antenna | |
Connector type: | SMA |
Impedance: | 50 Ohms |
Line interface | |
Interface type: | FXS with screw terminal blocks |
Power source | |
Power adapter: | (12 V / 1 A DC adapter included) option to connect an external 9 to 30 V DC power source |
Backup power: | 4×AA batteries, constantly monitored |
Configuration and upgrade | |
Local: | web UI over USB |
Cloud: | 2N® Elevator Center |
Other | |
Dimensions: | 7.7 x 4.7 x 2.4 in |
Weight: | 1.3 lb |
Humidity: | max 90%, non condensing |
IP coverage: | IP43 |
Operating temperature: | -40°F to +185°F |
Status LEDs: | power, cellular network, FXS line, data, signal strength |
Certifications: | FCC Part 15b |
UL 62368-1 | |
PTCRB | |