2N® 2Wire for Lifts
The 2N® 2Wire for lifts is a practical set of two convertors that allows you to connect any two IP devices even in places with no Ethernet. Its invaluable advantage is that you don’t need to add new cables to the lift. Thanks to the 2N® 2Wire set, you simply connect the required IP device in the cabin to the existing travelling cable and then to the IP network.
- Communications and Power supply on two wires
- Easy installation
- Long range transfer
- About
- Technical area
- Accessories
- SW Applications
- Sales Area
About
Features & Benefits
-
Communication and Power supply on two wiresConnect any IP device even in places where there is no available IP infrastructure and have only two-wire line available.
-
Easy installationSimply connect the communication interface and power supply, and the device is ready for use.
-
Long range transferPowering the IP-connected devices via PoE is possible up to a distance of 720ft, twice as much as allowed by standard Ethernet cable length.
-
Universal Ethernet ‘extension’The 2N® 2Wire brings Ethernet connectivity to areas without Ethernet infrastructure. A typical example is an elevator cabin where you need to connect an IP device, e.g. 2N IP intercoms, or lift communicators.
-
Robust aluminium housingThanks to its aluminium housing the 2N® 2Wire converter is extremely durable and meets the requirements of in-lift operation.
-
Utilize existing cablingWith the 2N® 2Wire you can use the existing wiring and don’t have to lay new cables or make other modifications.
-
ReliabilitySignificantly more reliable than alternatives such as WiFi connection, especially for critical applications such as alarm communicators, which have to be constantly available.
-
Screw-in connectors2N® 2Wire uses high-quality connectors, which prevents cables falling out, making it more reliable.
-
Power supplyIncluded is an adapter with a selectable US/UK/EU plug.
Show more
Technical Specification
Ethernet Interface | |
Connector type: | RJ45 |
Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation |
IEEE 802.3af/at 40W, PoE+ compatible | |
Installation requirements | |
Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
Impedance: | 25Ω to 100Ω |
Transfer range: | max. 720ft with Cat 6 |
Number: | max. of 4 sets of convertor units per non-configurable switch |
Transfer method | |
Access method: | CSMA/CA and TDMA |
Modulation method: | Windowed OFDM |
Frequency band: | 1.8MHz to 30MHz |
LED indicator lights | |
Power supply: | Blue – power on |
BNC: | Green – connection on |
PoE: | Green – connection on |
Electrical power supply | |
AC input: | 100~240V AC, 50~60Hz |
DC output: | 48V DC / 0.84A~1.3A |
Mechanical properties | |
Dimensions: | 1.57 x 1.57 x 2.95 in (h x w x d) |
Weight: | 4.2 oz |
Material: | extruded aluminium |
Operating temperature: | 14°F – 122°F |
Storage temperature: | -22°F – 158°F |
Show more
Technical area
Technical Specification
Ethernet Interface | |
Connector type: | RJ45 |
Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation |
IEEE 802.3af/at 40W, PoE+ compatible | |
Installation requirements | |
Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
Impedance: | 25Ω to 100Ω |
Transfer range: | max. 720ft with Cat 6 |
Number: | max. of 4 sets of convertor units per non-configurable switch |
Transfer method | |
Access method: | CSMA/CA and TDMA |
Modulation method: | Windowed OFDM |
Frequency band: | 1.8MHz to 30MHz |
LED indicator lights | |
Power supply: | Blue – power on |
BNC: | Green – connection on |
PoE: | Green – connection on |
Electrical power supply | |
AC input: | 100~240V AC, 50~60Hz |
DC output: | 48V DC / 0.84A~1.3A |
Mechanical properties | |
Dimensions: | 1.57 x 1.57 x 2.95 in (h x w x d) |
Weight: | 4.2 oz |
Material: | extruded aluminium |
Operating temperature: | 14°F – 122°F |
Storage temperature: | -22°F – 158°F |
Show more
Register for Technical Training
View our technical training courses. Choose the one that suits you best.
See more Sales Area
Request information Selling Propositions
- Communication and Power supply on two wiresConnect any IP device even in places where there is no available IP infrastructure and have only two-wire line available.
- Easy installationSimply connect the communication interface and power supply, and the device is ready for use.
- Long range transferPowering the IP-connected devices via PoE is possible up to a distance of 720ft, twice as much as allowed by standard Ethernet cable length.
- Universal Ethernet ‘extension’The 2N® 2Wire brings Ethernet connectivity to areas without Ethernet infrastructure. A typical example is an elevator cabin where you need to connect an IP device, e.g. 2N IP intercoms, or lift communicators.
- Robust aluminium housingThanks to its aluminium housing the 2N® 2Wire converter is extremely durable and meets the requirements of in-lift operation.
- Utilize existing cablingWith the 2N® 2Wire you can use the existing wiring and don’t have to lay new cables or make other modifications.
- ReliabilitySignificantly more reliable than alternatives such as WiFi connection, especially for critical applications such as alarm communicators, which have to be constantly available.
- Screw-in connectors2N® 2Wire uses high-quality connectors, which prevents cables falling out, making it more reliable.
- Power supplyIncluded is an adapter with a selectable US/UK/EU plug.
Show more
Technical Specification
Ethernet Interface | |
Connector type: | RJ45 |
Speed: | 10/100 Base T, half-duplex / full-duplex, auto-negotiation |
IEEE 802.3af/at 40W, PoE+ compatible | |
Installation requirements | |
Cable type: | 2-wire, Cat 5e, Cat 6 or similar |
Impedance: | 25Ω to 100Ω |
Transfer range: | max. 720ft with Cat 6 |
Number: | max. of 4 sets of convertor units per non-configurable switch |
Transfer method | |
Access method: | CSMA/CA and TDMA |
Modulation method: | Windowed OFDM |
Frequency band: | 1.8MHz to 30MHz |
LED indicator lights | |
Power supply: | Blue – power on |
BNC: | Green – connection on |
PoE: | Green – connection on |
Electrical power supply | |
AC input: | 100~240V AC, 50~60Hz |
DC output: | 48V DC / 0.84A~1.3A |
Mechanical properties | |
Dimensions: | 1.57 x 1.57 x 2.95 in (h x w x d) |
Weight: | 4.2 oz |
Material: | extruded aluminium |
Operating temperature: | 14°F – 122°F |
Storage temperature: | -22°F – 158°F |
Show more