Intercoms
FAQs
De artikelen zijn alleen beschikbaar in het Engels.
Selecteer productcategorie
Lijst met veelgestelde vragen
- 2N 2Wire - Installation and Configuration
- 2N Analog Intercom / Busy tone - Parameters setting
- 2N Analog Intercom does not work after installation
- 2N Analog Intercom hangs up - does not hang up automatically
- 2N Analog Intercom - How to provide all information to effectively resolve a technical issue
- 2N Analog Intercom / Incoming call - does not accept the incoming call
- 2N Contact Centre Solution installation
- 2N Fortis Commander - How to continue programming your site with new programming software and Access Commander 3.5
- 2N Fortis Commander - overview and how to use it
- 2N Fortis deployment with 2N Access Commander and Fortis Commander
- 2N Fortis - mechanical assembly and disassembly
- 2N Indoor View - How to set up calling via My2N
- 2N IP Audio Control Panel setting
- 2N IP Audio Kit Lite - Button does not work
- 2N IP audio unit can not connect to the 2N® IP Audio Manager - what could be the reason?
- 2N IP Eye issue - How to enable 2N IP Eye in Windows firewall?
- 2N IP intercom into My2N - I don't have a card with the Security Code
- 2N IP intercom into My2N using the Security Code
- 2N IP intercoms, Access Units, IP audio units - Firmware upgrade
- 2N IP Intercoms - Diagnostics and Troubleshooting
- 2N IP Intercoms - External IP camera connection (Axis IP camera guide included)
- 2N IP Intercoms - Factory reset
- 2N IP Intercoms - How to add user access credentials
- 2N IP Intercoms - IP Address retrieval
- 2N IP Intercoms - User sounds uploading
- 2N IP Intercoms – Integration with 3rd party NVR/VMS systems without ONVIF and RTSP
- 2N IP phone D7A - upgrade to 2N FW version 150.86.57.8
- 2N IP Style - bi-directional video setup
- 2N IP Vario - Reseting issue resets to default values after power supply reset
- 2N Lift1 - Configuration backup - How to backup configuration, how to capture it and trace it
- 2N LTE Verso - How to perform factory reset
- 2N LTE Verso - Registration to My2N and basic setup
- 2N Meeting Room user guide
- 2N Net Audio Decoder - Channels - What is the purpose of CHANNELS in and how to set it up?
- 2N Net Audio Decoder - Wireless connection of the unit via NETGEAR Wi-Fi client
- 2N Net Audio Encoder - how to setup and use
- 2N NetStar - Initial configuration - How to start?
- 2N NetStar SW - How to install and license 2N NetStar SW
- 2N Network Scanner - Locating 2N devices in the network
- 2N OfficeRoute & Alcatel OXO connected via SIP trunk
- 2N Records Manager installation
- 2N Security Relay - Describtion and usage with 2N IP Intercoms
- 2N SIM Star blocks FW upgrade on gateways
- 2N SIM Star shows a low ACD value
- 2N SIM Star shows a low ASR value
- 2N SingleTalk - Difference between basic and full version - What is the difference between basic and full version of 2N SingleTalk?
- 2N SingleTalk - Wont hang up automatically - What to do, if it wont hang up automatically?
- 2N SmartCom/2N SmartCom PRO - Basic configuration
- 2N SmartCom PRO / Factory reset - How to make a factory reset
- 2N SmartCom PRO - Input circuits
- 2N SmartCom PRO M-Bus overview
- 2N SmartCom PRO - Terminal error buffer code description
- 2N StarGate - Multiple outbound SMS web users
- 2N Starpoint IP Phones - How to synchronize phonebook with 2N NetStar
- 2N Student Monitoring System with 2N IP Intercoms
- 2N VoiceBlue Lite with my PBX station - Can I use?
- 2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
- 2N VoiceBlue Next GSM gateway - How to configure it with 2N IP intercoms?
- 2N VoiceBlue Next - How to configure it with Auerswald PBX?
- 2N VoiceBlue Next - How to set? (version 1.19 and lower)
- 2N® IP Style - custom scene crop option
- 3CX - How to interconnect with 3CX?
- 3rd party SIP device - How to add it in My2N site
- 4 lifts connected to single 2N Lift8 Central Unit without any additional splitters
- Access credentials - How to add them to 2N device?
- Access key - How to configure on the Indoor Touch
- Access logs of 2N Mobile Key
- Access Points - How to define access points in 2N Access Commander
- Acquiring-IP-address-of-lift-communicator-2N-LiftIP
- Adding 2N LiftGate to the Elevator Center
- Adding external Axis camera to 2N Indoor Touch 2.0
- Alarm1_2 and Long_Alarm2_setting
- Alcatel-Lucent OXE (OmniPCX Enterprise) R12: How to interconnect with 2N VOICEBLUE NEXT
- Alcatel OXO - How to interconnect with Alcatel OXO 7?
- Allwin (billing software) does not work
- AMS (Autonomous Metering System) - protocol IEC 62056-21
- AMS (Autonomous Metering System) - protocol M-Bus
- AMS error codes description (M-Bus, IEC 62056-21, S0, IN, ONF)
- AMS for IN1 IN2 IN3 (pulses S0, analog value, digital value)
- Analogue modems - supported protocols by 2N® EasyGate and 2N® SmartGate
- Answering Unit Registration and Configuration of Calls in My2N
- Anti-passback - How to configure in 2N Access Commander
- Apartment admin - Guest access
- API opening - how to activate Access Units switches from the App
- APS reader - Connection of lock and card reader (APS) including jumper configuration to 2N IP Vario
- Asterisk - How to interconnect with Asterisk?
- Attendance and Presence - How to configure in 2N Access Commander
- Audio files - Progress tones - Required format in 2N Netstar
- Audio-relay card - How to set up jumpers on NetStar
- Audio - What can I do when call is connected but I can't hear any voice? (RTP packets are empty)
- Audio - What should I do if I can't hear ringback tone?
- Audio - What to check if I have voice quality issue?
- Audio - What to check if You can't hear the ring-back tone?
- Audio - What to check if you have voice quality issue?
- AutoCLIP routing - How to set AutoCLIP routing?
- AutoCLIP Routing - How to set in 2N VoiceBlue MAX
- AutoCLIP routing is enabled but not working
- AutoClip Routing on NetStar
- Automatic startup of 2N Access Commander BOX after a power outage
- Automation, 2FA - How to configure 2FA on 2N IP Intercoms
- Automation, Black/whitelist - How to block or allow specific numbers to call an intercom
- Automation, Callback - How to configure callback with 2N IP Intercom to My2N
- Automation, Call Delay - how to set a different ring time for diferent call destinations
- Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
- Automation, Calling two numbers from 2N IP Intercom over GSM gateway with a single SIM card
- Automation, Card Call - Initiating a call after card verification
- Automation, DoorOpenTooLong - Securing door against excessively long opening on 2N IP Intercoms
- Automation, Multicast - Configuring Lock/Unlock all feature on 2N IP Intercoms
- Automation, Multicast - How to receive multicast paging from up to 5 sources
- Automation, Multicast paging - How to configure paging from 2N IP Intercoms
- Automation, Multicast - Receiving multicast paging from up to 5 sources
- Automation (Node-RED) in Access Commander
- Automation, one-time access - How to set up one-time codes with automation
- Automation, OpenDoor - Controling the card reader signalization
- Automation, Silent Alarm - How to configure silent alarm on 2N IP Intercoms
- Automation, UnauthorisedDoorOpen - Securing doors against unauthorised door opening in 2N IP Intercoms
- Auto Provisioning via TFTP
- AUX card - I'm connected via RS232 to COM2(AUX card) and I cannot upload new voice messages
- Avaya - How to interconnect with Avaya Aura Communication Manager using ISDN
- Avaya - How to interconnect with Avaya Aura Communication Manager using SIP
- Axis camera in 2N Indoor Touch
- Axis network intercom into My2N
- Axis Network I/O Relay - Controlling using HTTP commands
- Backup and setting restore - 2N Access Commander
- Battery failure signalization - EasyGate PRO ""snake"" signal strength
- Battery replacement
- Beta testing
- Bluetooth authentication - How to configure it in 2N® Access Commander
- Bluetooth Card Mode - how to setup My2n App and use the feature
- Bluetooth - Encryption Keys for Location
- Bluetooth Motion Mode - how to setup My2n App and use the feature
- Bluetooth Tap in App Mode - how to setup My2n App and use the feature
- Bluetooth Touch Mode - how to setup My2n App and use the feature
- Busy tone - When the button is pressed, 2N Analog Intercom gives the busy tone
- Calculating data consumption on LTE Verso
- Callback - How to set Callback on 2N VoiceBlue MAX?
- Callback - How to set Callback on ViceBlue Next?
- Callback - How to set SMS Callback on VoiceBlue Next
- Call between 2N LiftIP and IP Phone with AXIS Camera Feed
- Call disconnection - What to do if a call is not ended immediately?
- Call disconnection - What to do if a call still continues up to 30s after call ended?
- Calling - A call is not disconnected immediately
- Calling between 2N Lift8 and IP Phone via VoIP module
- Calling between 2N LiftIP and IP Phone
- Calling - How many simultaneous calls can I do with 2N EasyGate?
- Calling - How many simultaneous calls can I do with 2N SmartGate?
- Calling locally between 2N IP intercom and 2N IP Phone D7A
- Calling - Outgoing call through BRI Lite/Enterprise is rejected
- Calling through the My2N SIP Proxy will enable you to call between devices listed in your My2N account
- Call in sequence or parallel using My2N
- Call logs - How to use them in 2N Access Commander
- Call recording - how to record marked calls on NetStar?
- Call routing - Call to GSM number goes over PRI2 interface
- Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N BRI Lite and BRI Enterprise
- Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N StarGate and 2N® BlueTower
- Call routing - Changes in call routing in firmware 1.20+ compared to earlier versions on 2N VoiceBlue Next
- Call routing - Forwarding call to one extension number - VoiceBlue Next
- Call routing - How can I allow dynamic CLIP routing?
- Call routing - How can I route all incoming calls to receptionist or operator?
- Call routing - How many simultaneous calls can I do?
- Call routing - SIM selection based on called number
- Call routing - SIM selection based on called number (version 1.19 and lower) on VoiceBlue Next
- Calls from 2N Indoor Touch to 2N IP Intercom
- Call transfer doesnt work and why?
- Camera settings guide for 2N IP Style
- Can I send a FAX with my 2N OfficeRoute?
- Can I use 2N BRI Lite or 2N BRI Enterprise with my PBB?
- Cannot add a device to My2N/move a device to a different My2N account
- Capture network and logs - Lift IP 2.0
- Capture network traces in Sentrio
- Card reader gets stuck
- CCM Express version 4.1 - How to interconnect with CCM Express version 4.1?
- CDR - How can I delete CDR?
- Certification for web authentication
- Change of billing information (company name & address) in My2N
- Change to the new apartment license model in My2N
- CLIP - Does 2N EasyGate support CLIP function?
- CLIP - Does 2N SmartGate support CLIP function?
- CLIP - Incoming CALL ID transfer to phone or PBX
- CLIP is NOT displayed on analogue lines CO
- Communication between 2N Indoor Compact and 2N IP intercom via Device ID
- Communication via Device ID of 2N IP intercom
- Company Admin - Add/Delete
- Comparison of IP Verso and LTE Verso
- Compatibility Mode in Access Commander
- Conference - How to create a conference call and conference room
- Configurating 2N IP Mobile v.4 to call over a SIP proxy. Skip to end of metadata
- Configurating 2N Lift1 via SMS in combination with 2N EasyGate Pro
- Configuration backup and troubleshooting EasyGate IP
- Configuration backup - How to backup a configuration and how to capture a trace for 2N SIP Speaker (Horn)
- Configuration backup - How to backup configuration and how to capture a trace - 2N Lift8
- Configuration - Can I use 2N VoiceBlue Next with my PBX?
- Configuration - How do I configure 2N VoiceBlue Lite?
- Configuration - How to program 2N EasyGate?
- Configuration - How to program 2N SmartGate?
- Configuration - How to set 2N VoiceBlue MAX
- Configuration - How to set 2N VoiceBlue Next?
- Configuration of electrical outputs on 2N IP Intercoms
- Configuration of the switch codes on the My2N Cloud
- Configuration Tool Download
- Configuring email notification on 2N indoor Touch
- Configuring HTTP Commands on 2N Indoor Compact
- Configuring Wildix VoIP PBX with 2N IP Intercom
- confirmation-mode-how-to-configure-confirmation-mode-on-2n-lift1
- Confirmation-mode-How-to-configure-confirmation-mode-on-2N-Lift8
- Congifuring more unlock buttons in 2N Answering Units
- Connect 2N IP Phone D7A to My2N
- Connecting 2N SingleTalk via Well ATA-172P converter to VoIP server
- Connecting an old intercom to a 2N Access Unit using a 2N Security Relay
- Connecting bell button to 2N Indoor Touch 2.0
- Connecting Doorbell to the 2N OS Indoor Units
- Connecting WaveStore VMS to 2N IP Intercom
- Connection and configuration of a door contact to 2N IP Intercom/Access Unit
- Connection - Can I use 2N EasyGate instead of the landline?
- Connection - How can I connect SmartGate?
- Connection of 2 devices to one lock
- Connection of external buttons to the 2N IP Intercom
- Connection options - What are the possibilities of connection of 2N SingleTalk?
- Connection via HyperTerminal - How can I connect to VoiceBlue Lite using HyperTerminal?
- Connection via HyperTerminal - How can I connect using HyperTerminal?
- Connection via Putty - How can I connect using Putty?
- Connectors and LED in 2N LTE Verso
- Creation of SIP Trunk
- Credit card - How to change it
- Credit check - How can I recognize an amount of credit on my SIM card?
- Credit check - How to check credit of SIM card?
- Credit - How can I check balance on my SIM card? (USSD commands usage)
- CSV Import of users with their details
- CSV Synchronization - import / remove / update users and user's details
- CTI Interface - How to set up_version 3.X.X
- CUCM - How to interconnect with CISCO Call Manager 6, 7, 8?
- Custom language localization in 2N IP Mobile Application
- Dashboard and widgets in 2N Access Commander
- Data and voice - Is it possible to make a voice call and data transferring at the same time?
- Database backup - How to backup the database and how to capture a trace 2N NetStar SW
- Database - How to backup database of 2N IP Audio Manager
- Data transfer - Does 2N VoiceBlue Next gateway support data transfer?
- Data - Which interfaces can be used for a data call with 2N EasyGate?
- Data - Which interfaces can be used for a data call with 2N SmartGate?
- Deep clean cookies and site data of Access Commander's webpage
- Default login credentials
- Deleting 2N EasyGate IP from 2N Elevator Center
- Delivery solution with My2N automation
- Description and properties of 2N Indoor Touch 2.0
- Device IP Callback
- Device Security - Certificate Validation feature
- Diagnostics logs
- Dial plan - How to adjust the number of outgoing call?
- Dialthru gateway - How to set 2N NetStar as a dialthru gateway
- Difference between logins in My2N app
- Difference between Standalone and TCP Client mode in 2N SmartCOM (PRO)
- Differences between the old model 2N Indoor Touch and new one 2N Indoor Touch 2.0
- Direct call - How to set up a 2N IP Handset for a direct SIP call (without PBX) and how to open door
- Direct calling to 2N Indoor Talk from the AXIS door station AXIS A8004-VE
- Direct calling to 2N Indoor Touch 2.0 from AXIS A8207-VE
- Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8004-VE
- Direct calling to 2N Indoor Touch 2.0 from the AXIS door station AXIS A8105-E
- Direct call without SIP Proxy registration
- Directory setup of 2N IP Style
- Disabling the video preview with the 2N IP intercom outside the call?
- Display configuration
- Display customization of 2N IP Style
- Display - How to set up display of a device in 2N Access Commander
- Do 2N BRI Lite and 2N BRI Enterprise support data transfers?
- Do 2N VoiceBlue Lite gateways support data transfer?
- Does the 2N OfficeRoute support HSPA technology?
- Door lock does not open after dialing 00
- Door section - configuration on the 2N IP Intercoms
- Dormakaba locks - How to integrate one or more in your My2N site
- Download configuration backup in 2N Sentrio
- Download Configuration - Lift IP 2.0
- Downloading network trace, syslog and configuration file from 2N Indoor Touch 2.0
- Do you hear some clicking during the call or the call is even disconnected?
- EasyGate - Data and voice - Is it possible to make a voice call and data transferring at the same time?
- Easy Gate IP Battery reset
- Easy unlock and call hang in one step
- Elastix PBX - How to interconnect with Elastix PBX?
- Electric locks in 2N IP Intercom accessories
- Electronic lock groups - how to efficiently set up more 2N Fortis devices in an installation
- Elevator Center - user rights and differences
- Email to SMS - how to set it in 2N NetStar
- E-mail to SMS - How to set up
- Enforcer corner IP Camera - 2N Sentrio / LiftIP 2.0
- Ethernet port - 2N SmartCom PRO ETH configuration
- Event reporting on 2N BRI Lite and 2N BRI Enterprise
- extending-cancel-input-how-to-use-cancel-input
- Extending switch - How many switches could be connected to 2N SingleTalk?
- External Axis IP camera connection to LiftIP 2.0
- External IP Relay 9137410E & 9137411E - Controlling using HTTP commands from a 2N IP intercom or 2N Access Unit
- External LEDs - How to connect/disconnect external LED diods of 2N Lift1 car unit
- External LEDs - How to connect/disconnect external LED diods of 2N Lift8 car unit
- External storage - How to create an external storage
- External USB readers - Driver installation & usage
- External USB RFID reader 125kHz EMarine - Usage without any additional driver
- Factory Reset - Easy Gate IP
- Factory reset - How to do factory reset for 2N Fortis devices
- Factory reset - How to do factory reset for 2N Indoor Compact
- Factory reset - How to do factory reset for 2N Indoor Talk
- Factory reset - How to do factory reset on 2N Clip
- Factory reset - How to make a factory reset
- Factory reset - How to make a factory reset
- Factory reset - How to make a factory reset for 2N Net Audio devices
- Factory reset - How to make a factory reset of 2N BRI Lite/Enterprise
- Factory reset - How to make a factory reset of 2N NetStar
- Factory reset - How to make a factory reset on 2N Analog Intercom
- Factory reset - How to make a factory reset on 2N Lift1
- Factory-reset-How-to-make-a-factory-reset-on-2N-Lift8
- Factory reset - How to make a factory reset VBM EN
- Factory reset - How to make a factory reset VBN
- Factory reset - How to perform factory reset of 2N NetStar
- Factory reset - How to reset the settings of 2N IP Handset to the factory values
- Factory reset - Lift IP 2.0
- Factory reset of the 2N Access Commander Box
- Factory reset on 2N Access Units
- Factory reset on 2N LiftGate
- Factory-resetting-the-2N-LiftIP
- Factory setting (Default factory settings) - How to setup a Factory setting in 2N Indoor Touch
- Failure of network storage manager
- FAX - How to configure
- FAX - How to send FAX message or data to GSM and from GSM?
- FAX - How to send or receive FAX message or data?
- Fax - How to solve a problem with faxing over GSM network?
- Firmware 2N VoiceBlue Lite - How can I upgrade firmware?
- Firmware - Can I use firmware 03.00.xx?
- Firmware compatibility across 2N Access Commander versions
- Firmware downgrade - Is it possible to downgrade 2N NetStar?
- Firmware - How to make a firmware upgrade
- Firmware update - How to do firmware update for 2N Net Audio devices
- Firmware Update - How to do firmware update on 2N VoiceBlue MAX?
- Firmware Update via My2N
- Firmware update – How to do FW update or factory reset of 2N Indoor Touch 2.0
- Firmware upgrade for IP Sentrio
- Firmware upgrade - How to do firmware upgrade on device 2N Clip
- Firmware upgrade - How to make a firmware upgrade
- Firmware upgrade - How to make a firmware upgrade of 2N Access Unit?
- Firmware upgrade - How to make a firmware upgrade of 2N NetStar
- Firmware Upgrade - How to make a firmware upgrade on 2N BRI Lite and 2N BRI Enterprise?
- Firmware upgrade - How to make a firmware upgrade on 2N Indoor Compact
- Firmware upgrade - How to make a firmware upgrade on 2N Lift1
- Firmware Upgrade - How to make a firmware upgrade on 2N VoiceBlue Next?
- Firmware upgrade - How to make a firmware upgrade on 2N® Indoor Talk
- Firmware-upgrade-How-to-make-firmware-upgrade-on-2N-EasyGate-IP
- Firmware version numbering, configuration tool version numbering
- Format of audio tones
- Forwarding call does not work. What should I check?
- Free minutes - All free minutes are exceeded and I still want to be able to make calls GSM
- Free minutes - How to set them on 2N NetStar
- Free minutes - I want to use only free minutes on my SIM cards. What should I set it?
- Free minutes - Why is SIM1 still connected to the network after all free minutes have been used?
- Functionality-of-the-P100-Protocol-in-2N-Lift-Products
- Gmail SMTP Service - How to configure with Intercom units
- Gmail: Unable to send emails or log in after 2022-05-30?
- Grandstream GXV3140 - How to set it up with a 2N IP Intercom
- Grandstream GXV3175v2 - How to set it up with a 2N IP Intercom
- Grandstream GXV3240 - How to set it up with a 2N IP Intercom
- Grandstream GXV3275 - How to set it up with 2N IP Intercom
- Grounding-How-to-ground-2N-SingleTalk
- GSM to VoiceMail - How to route all incoming calls from GSM to VoiceMail
- H.323 trunk - How to configure
- Hardware - Compatibility of hardware between the latest (M202) and old (M112) CPU
- Hardware grounding - How to ground 2N EasyGate and 2N SmartGate
- Hardware - How to upgrade older 2N StarGate to the latest HW version
- Hardware versions - Difference between 2N Lift1 HW version 1 and 2N Lift1 HW version 2
- HAR file - How to generate them for Chrome
- HiPath 3000 - How to interconnect with Siemens HiPath 3000?
- Homebridge plugin for 2N intercoms
- How many ME users can I use?
- How many simultaneous calls can be made at once through one 2N BRI Lite or 2N BRI Enterprise?
- How many system (key) phones can be used on Omega?
- How many UMTS channels has got the 2N OfficeRoute?
- How to add Japanese language on 2N Clip Display (as a custom language)
- How to add Japanese language on 2N Indoor View Display (as a custom language)
- How to add Japanese language on IP Style Display (as a custom language)
- How to add smartphone or tablet in My2N account
- How to add the Easy Gate IP to the 2N Elevator Center - FAQ_Lift_private
- How to backup configuration and how to capture a trace on 2N Access Unit
- How to backup database of 2N SIP Mic
- How to backup the database and how to capture a trace 2N NetStar
- How to change the password of VPN connection for MikroTik?
- How to configure communication port on RS-232/RS-485 interfaces
- How to configure HTTP Commands on 2N Indoor View
- How to configure sending of SMS messages via SMPP feature on 2N gateways
- How to configure Wireless M-Bus port
- How to configure Wireless M-Bus port on 2N SmartCom PRO with fw 1.13.x and latest
- How to connect a 2N GSM gateway to an IP PBX
- How to connect a doorbell button to 2N Indoor Touch?
- How to connect external Axis Camera to Sentrio
- How to connect M-Bus device to 2N SmartCOM PRO ETH?
- How to connect meter supporting protocol IEC 62056-21 to 2N SmartCOM PRO ETH?
- How to connect meter with pulse output (S0) to 2N SmartCOM PRO ETH?
- How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
- How to connect WM-Bus meter to 2N SmartCOM PRO (ETH)?
- How to connect ZigBee device to 2N SmartCOM PRO (ETH)?
- How to control 2N Indoor Touch via Automation of 2N IP intercom
- How to deny malicious calls from internet that make enormous bills on OfficeRoute
- How to deny malicious calls from internet which make enormous bills on Office Route
- How to detect M-Bus meters by AT command
- How to detect M-Bus meters by SMS
- How to do factory reset for 2N Indoor View
- How to do firmware update?
- How to do FW update or factory reset of 2N Indoor Touch?
- How to do the module FW upgrade
- How to edit the called number from PBX on 2N BRI Lite and 2N BRI Enterprise?
- How to enable external camera on My2N
- How to fix push notifications for Android OS
- How to get ip address - Lift 8
- How to get network trace and logs from the 2N Indoor Touch
- How to get the Omega PBX to default values?
- How to install 2N Clip 2Wire-IP
- How to install a 3rd party Android application on 2N Indoor Touch?
- How to install AoC reader with 2N NetStar
- How to integrate 2N IP Devices with MS Teams
- How to make a custom ringtone for Mobile Video application on iOS
- How to make a factory reset of 2N Office Route?
- How to make a firmware upgrade on 2N Indoor View
- How to make a firmware upgrade on 2N Lift8
- How to make an a update - Lift IP 2.0
- How to provide all information to effectively resolve a technical issue
- How to provide all information to effectively resolve a technical issue on 2N Access Unit?
- How to provide all information to effectively resolve a technical issue on 2N EasyGate
- How to provide all information to effectively resolve a technical issue on 2N NetStar?
- How to provide all information to effectively resolve a technical issue on 2N NetStar SW?
- How to provide all information to effectively resolve a technical issue on 2N SmartGate
- How to provide all information to effectively resolve a technical issue on 2N StarGate or 2N BlueTower?
- How to provide all information to effectively resolve a technical issue on SIP Audio
- How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue MAX?
- How to provide all information to effectively resolve a technical issue on the 2N VoiceBlue Next?
- How to provide all information to effectively resolve a technical issue with 2N Indoor Talk
- How to provide all information to effectively resolve a technical issue with 2N Indoor Touch
- How to provide all information to effectively resolve a technical issue with 2N Indoor View
- How to provide all information to effectively resolve a technical issue with 2N OS device
- How to provide logs from the My2N application
- How to read analog value on input 2N SmartCOM PRO ETH?
- How to read data from 2N SmartCOM (PRO) memory?
- How to report an issue on 2N SIM Star?
- How to report a problem on Omega series?
- How to report a technical issue with the 2N VoiceBlue MAX
- How to report technical issue - 2N SmartCom/2N SmartCom PRO
- How to report technical issue on 2N EasyRoute / 2N SpeedRoute
- How to report technical issue on 2N OfficeRoute?
- How to restrict calling from the My2N app to the 2N Intercom
- How to seamlessly switch from 2N Mobile Video to the My2N app
- How to send and receive a SMS
- How to send/receive separate multicast streams on 2N IP Intercoms via Automation
- How to set a call simulation on 2N SIM Star Server?
- How to setup alternative phonebook in My2N
- How to setup FXS to GSM calls with VoIP backup on 2N VoiceBlue MAX
- How to set up Prepaid Wi-Fi Hotspot
- How to switch between the internal and external camera from 2N Indoor Touch
- How to upgrade firmware from 4.05 or earlier to 4.06 or higher on Omega?
- How to upgrade Records Manager
- How to use external notifications and connect with relay on the 2N Indoor Touch?
- How to use Group Authentication / Access key in communication between 2N IP Intercoms and 2N Indoor Touch
- How to use the DnD (Do not Disturb) mode on 2N Indoor Touch?
- How to use the Video voice mail on 2N Indoor Touch?
- HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
- HTTP API - 2N Indoor Touch relay control using 2N IP Verso automation
- HTTP API - Configuration upload
- HTTP commands
- HTTP Commands – How to configure them in Answering units
- HTTP - How to trigger pre-recorded announcement message by HTTP command
- HTTP REST API
- Iam not able to connect to the configuration interface of OfficeRoute
- I did not received an e-mail
- I don't get screenshots of missed calls in My2n App or in answering unit history call
- ID Tables - How to set it in 2N NetStar
- I forgot the Admin password
- if-you-need-to-change-an-ip-of-the-2n-officeroute
- I have a mobile with Android version 8 or 9 and want to use my2n App
- Import of users from device
- incoming-call-drops-after-first-ring
- Indoor Touch 1.0 - How to configure 2N IDT1.0 to make and receive calls through My2N
- Indoor Touch 2.0 - How to configure 2N IDT 2.0 to make and receive calls through My2N
- Induction loop for 2N IP Intercoms and Answering units
- INIT status - What is necessary to check, if INIT led light on VoIP card shines red?
- INIT status - What to do if all cards are still in "INIT" status?
- INIT status - What to do if VoIP card is still in INIT status?
- INIT status - Why is Init LED blinking on GSM or UMTS card on 2N StarGate or 2N BlueTower?
- Innovaphone PBX (IP302) - How to interconnect with Innovaphone PBX (IP302)?
- Input circuit - 2N SmartCom/2N SmartCom PRO calibration
- Input S0 - 2N SmartCom/2N SmartCom PRO S0 pulse counting
- Installation and Configuration of Lift8 for Multiple Shafts
- Installation - How to install 2N SIM Star Server?
- Installation - How to install a new gateway? - Step-by-step guide
- Installation name of 2N Access Commander
- Installation of virtual machine and Box solutions
- Integration the Grandstream HT801 with 2N IP Intercom
- Interconnection - Can I use 2N EasyGate with my PBX?
- Intergration Loxone Miniserver with 2N intercom
- Internet connection does not work on 2N SpeedRoute or 2N EasyRoute
- Internet Radio - How to set up
- Interoperability manual for Gigaset DX800A
- iOS 14 & macOS Big Sur - Issues with accessing website
- iOS - no video preview (Fullscreen / Banner mode)
- IP Address - How to find the IP address of the 2N SIP Mic
- IP address - How to get IP address of 2N Access Units?
- IP address - How to setup static / dynamic IP address
- IP intercom - How to configure call settings from My2N platform
- IP Sentrio - Factory reset
- IP setting - How can I change the IP address of 2N VoiceBlue Lite?
- IP setting - How can I use NAT keep alive?
- IP setting - How to call through gateway on private network from public network?
- IP setting - How to find out the IP address?
- IP setting - How to register the gateway on domain name instead of IP address?
- IP setting - How to register the gateway on domain name instead of IP address?
- IP setting - How to set the default GW/mask for the IP of VoIP card?
- ISDN - Basic principle of VOIP operation and ISDN synchronization
- ISDN trunk interconnection Alcatel
- ISDN trunk interconnection Siemens
- Issues accessing the web interface on macOS
- IVR - How to create (without 2N IVR Editor)
- IVR - How to set it in 2N Netstar
- I want to start using the My2N app instead of Mobile Key, but I do not see the „+“ icon in the My2N app to start the PIN pairing flow, what should I do?
- Keyboard layout - How to set different keyboard layout in Linux of 2N Access Commander
- Keypad issue with 2N IP Vario - some keys do not work
- KNX connectivity with 2N IP Intercoms
- Language mutation - How to create own language mutation for 2N IP Intercoms
- LCR - How to use
- LDAP - How to synchronise Phone book in 2N NetStar via LDAP protocol
- LDAP - Users synchronisation from a remote directory
- LED indication - 2N SmartCom/2N SmartCom LED indication
- Legacy tools - M112 CPU
- License - 2N SmartCom server
- License extension - I need to extend my license for 2N StarGate or 2N BlueTower. What information should I give you?
- License - How can I use license key?
- License - How to get a license for 2N IP Intercom
- License - How to upload licenses?
- License Plate Recognition (LPR)
- Licenses on VoiceBlue Next - Detailed information
- License status: Locked
- License - What information is needed for generating license?
- Licensing since the version 2.0 in 2N Access Commander
- Lift 8 Configuration for Multiple Shafts
- Lift access control - configuring 2N systems
- Lift IP 2.0 factory reset
- List of tested 3rd party applications that can be installed on 2N Indoor Touch
- Lockdown feature in 2N Access Commander
- LOG file - I see the message "HCX err" in the gateway log. What does it mean?
- Login details for Control panel in SW version 1.3.6 or higher
- Logs management
- Loudspeaker - How to properly connect loudspeaker
- LTE Debug Module – how to use it?
- LTE Verso - How to calculate data consumption
- Management over the Internet
- MicroSD card - A list of tested and approved MicroSD cards for 2N Indoor Touch 2.0
- MicroSD card - List of tested 3rd party MicroSD cards
- MicroSIP - Direct call with 2N IP Intercom
- Microsoft Outlook - How to integrate Microsoft Outlook with 2N Netstar
- MIFARE DESFire EV2/EV3 - How to install 2N PICard Commander and program cards
- Migrate configuration from old installation to new one (the same version)
- Milestone integration - How to setup with 2N Access Commander
- Milestone XProtect - Alarm event from 2N device on Milestone XProtect
- Milestone XProtect and 2N IP Intercom integration
- Milestone XProtect - How to add, monitor and control door units stored in 2N Access Commander
- Milestone XProtect - How to display video tracks and event information surrounding an access by a user from 2N Access Commander
- Milestone XProtect Smart Client - log operator's actions
- Milestone XProtect - Video Pop-up on 2N Device's Action
- Mobile Video troubleshooting
- Mobility Extension - How can I configure Mobility Extension?
- Mobility Extension - How to configure
- Mobility Extension - How to create ME in 2N NetStar or 2N NetStar SW
- Mobility Extension - How to set Mobility Extension on VoiceBlue Next?
- Mobility Extension (ME) for a user on Omega
- Monitoring of batteries on EasyGate PRO
- Multicast Discovery function on 2N Indoor Touch 2.0
- Multicast Discovery - What is it good for
- Multicast Stream configuration with IP Audio Manager
- Multifactor Authentication (MFA) - How to enable and use it in My2N Platform
- My2N - 2N Mobile video credit vouchers and licenses
- My2N account management (company/site admins & users)
- My2N and Apple watch
- My2N apartment Admin Features
- My2N app access - How to set it up
- My2N app and 3rd party apps
- My2N App Offline Pairing - Opening doors via Bluetooth
- My2N App on AppleWatch Access via complications (widgets)
- My2N - How to sign up
- My2N/KONE integration
- My2N - Low audio issue
- My2N platform and 3rd party SIP calls
- MY2N Platform Security Overview
- My SIM in Omega card does not log into network. Why?
- Netstar diagnostic tool pinout
- NetStar unreachable from the programming tool
- Network proxy settings in 2N Access Commander – what they are and when to use them
- Network Trace - How to get Wireshark network trace and network trace from 2N BRI Lite / Enterprise?
- Network Trace - How to get Wireshark network trace and network trace from 2N StarGate / 2N BlueTower?
- Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue MAX?
- Network Trace - How to get Wireshark network trace and network trace from 2N VoiceBlue Next?
- New API Authentication Method for My2N Integrations
- New Site models - Differences and Examples
- No card except of CPU is on after you switch on the NetStar?
- Normalization - How to use
- No tones - I can't hear any tones on 2N VoiceBlue Lite when setting up a call. What should I do?
- No video? Try to check the following solutions!
- NS Admin Tool - Supported operating systems
- Occupancy Management in 2N Access Commander
- Offline Bluetooth pairing and modes (Tap In App, Touch On Device, Card, Motion Detection)
- Offline Pairing - How to set it up
- One-button call setup of 2N Analogue Vario
- One card for 2N Fortis and 2N Picard at the same time
- One click unlocking and hanging up mode
- OpenVPN server & client
- Output relay - How to use it?
- Overview of the Ports, Domains and Codecs of My2N and Elevator Center
- panasonic-ncp-how-to-interconnect-with-panasonic-ncp-pbx
- Password recovery in 2N OS devices
- Password RS232 - 2N SmartCom/2N SmartCom PRO against unauthorized configuration
- PBX booster - How to set 2N NetStar as a PBX booster
- PC Operator and Application server - How to install it in 2N NetStar
- Peer-to-peer call to 2N Indoor Compact from the AXIS door station A8004-VE
- Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8105-E
- Peer-to-peer call to 2N Indoor Compact from the AXIS door station AXIS A8207-VE
- Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8105-E
- Peer-to-peer call to 2N Indoor Talk from the AXIS door station AXIS A8207-VE
- Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8004-VE
- Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8105-E
- Peer-to-peer call to 2N Indoor Touch from the AXIS door station AXIS A8207-VE
- Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8004-VE
- Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8105-E
- Peer-to-peer call to 2N Indoor View from the AXIS door station AXIS A8207-VE
- phone-line-compatibility-2n-lift1-2n-lift8-a-2n-lift-ip
- Port Forwarding - I am not able to access any port specified in Port Forwarding
- Port Randomization in 2N IP Mobile (Intercoms)
- PRI card - What to check if LED Lay 1 and/or 2 on PRI card do not light up/blink
- PRI gateway - How to set 2N NetStar as a PRI gateway
- Problems with sending and receiving emails from NS
- Problem with opening a configuration in service tool for LIft 8
- Programming - Entering the programming menu
- Providing all information to effectively resolve a technical issue on 2N Lift8
- Providing technical information to effectively resolve a technical issue on 2N Lift1
- QR code creating and sending over e-mail
- Recording - How to record the calls on VoIP trunk and PRI interface
- Recording your own user message for 2N Lift8
- Register a 2N IP Handset to My2N or another PBX / proxy server
- Registration of 2N Lift8 to 2N OfficeRoute
- Registration of LTE Verso to My2N and basic setup
- Remote Control - How to make it work with 2N Net Audio Decoder?
- Remote control - How to setup and use Remote Control over GSM?
- Reporting a technical problem with 2N IP Handset device (firmware, reset, backup, trace, logs)
- Reports - what data are exported
- REX button connectivity
- REX button - How to connect to a 2N Access Unit
- RFID Card/RFID Tag Configuration
- RMA - What to check before the RMA process for 2N analog gateway
- RMA - What to check before the RMA process for 2N analog Intercoms
- RMA - What to check before the RMA process for 2N analog Intercoms
- RMA - What to check before the RMA process for 2N Lift1
- RMA - What to check before the RMA process for 2N Lift8
- RMA - What to check before the RMA process for 2N LiftIP
- RMA - What to check before the RMA process for 2N Net Audio devices
- RTP destinations - How to test it with VLC media player?
- Scheduler - How to set up
- Scheduler - How to use Announcement Scheduler
- Sending SMS upon input trigger
- Sending SMS upon input trigger on EasyGate IP
- Sensitivity - Access_private
- Server logs - 2N SmartCom server
- Service password - I forgot the service password
- Services with your Linksys phones do not work
- Setting 3rd party IP camera in 2N Indoor View
- Settings of 2N OfficeRoute as a GW for Siemens OpenScape PBX
- Setting up 2N IP Intercom with SNOM 760 phone
- Setting up a call between 2N LiftIP / Lift8 with VoIP module and 2N VoiceBlue Next gateway
- Setting up call from a 2N IP intercom to a 2N Indoor Talk and vice versa
- Setting up call from/to 2N IP Intercom in 2N Indoor Touch 2.0
- Setting up calls from and to 2N IP intercom
- Setting up direct call betwenn 2N LiftIP with an external IP camera (Revotech) and IP phone (Grandstream GXV3275)
- Setting up Grandstream GXV3672 for external camera for 2N IP Intercom
- Setting up static IP address on 2N LiftIP
- Seznam SMTP service - How to configure with Intercom units
- SIM card logging - What to check if SIM card is not logging?
- SIM card logging - What to check if SIM cards do not log into network?
- SIM card usage - How to switch SIM card every 4 hours?
- SIM card usage - How to switch SIM cards at the specific time of day?
- SIM card usage - How to use both SIM cards equally?
- SIM card - What to check if SIM card does not log to GSM network?
- SIP calling using My2N
- SIP over UDP Support Ending in November 2025
- SIP Provisioning - How to set it in 2N NetStar
- SIP Proxy - How many users can be registered?
- SIP Proxy - How to create it and add VoIP terminal
- SIP Proxy - How to register 2N IP Intercom to 2N Netstar or 2N Netstar SW
- SIP Proxy port - How to change it from default 5060
- SIP Proxy registration
- SIP Proxy registration on Answering Units with 2N OS
- SIP Proxy registration on IP intercoms
- Site models - Differences and Examples
- Sizes of Spindle and Cylinder for project
- Slideshow on 2N IP Intercoms display
- SMPP connection - How to connect ActiveXperts SMPP server
- SMPP connection - How to connect Diafaan SMPP server
- SMS at no answer - How to set it in 2N NetStar
- SMS at no answer - How to set "SMS at no answer" on 2N VoiceBlue MAX
- SMS at no answer - How to setup "SMS at no answer"?
- SMS at no answer - SMS at no aswer does not contain the called party number
- SMS CallBack - How to set in 2N NetStar
- SMS messages - How does "messaging control" work on VoiceBlue Next (SMS queues)?
- SMS messages - How to configure Email2SMS and SMS2Email features with Microsoft Outlook for VBN?
- SMS messages - How to configure Email2SMS and SMS2Email features with Mozilla Thunderbird on VoiceBlue NEXT?
- SMS messages - How to configure Email2SMS and SMS2Email features with Windows Live Mail?
- SMS messages - How to send and receive messages? - SMS gateway integration
- SMS messages - How to send and receive messages with Microsoft Exchange server?
- SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Microsoft Outlook?
- SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Mozilla Thunderbird?
- SMS messages - How to set SMS2Email and Email2SMS on 2N StarGate with CPU M202 version (2013+) with Windows Live Mail?
- SMS messages on VoiceBlue Next - How to set SMS at no answer?
- SMS programming - How to configure 2N Lift8 over SMS messages
- SMS reader - How to install it with 2N NetStar
- SMS to EMAIL - How to set it in 2N Netstar
- SMTP and notifications - How to set in 2N Access Commander
- SMTP Gmail service configuration in 2N Access Commander
- SNMP - How to configure SNMP
- SNOM 870 - Setup with 2N IP Intercom
- Specification of Maximum capacity in 2N VoiceBlue Next
- SSH - How to connect over SSH to 2N Access Commander
- SSL / TLS - CA certificate - How to add certificate authority to Linux of 2N Access Commander
- SSL / TLS - User certificate - How to add CA signed user certificate to 2N Access Commander web
- Starting manual for integration with 2N IP Intercoms
- Static IP address - How to set a static IP address on a 2N Indoor Touch 2.0
- Static IP address - How to set up static IP address
- Static IP address - How to set up static IP address
- Static IP address - How to set up static IP address for 2N NetStar
- Static IP address - How to set up static IP address for 2N SIP Audio products
- Static IP address - How to set up static IP address for 2N SIP Audio products
- Static IP address - How to set up static IP address in 2N Access Commander
- Static IP address - How to set up static IP address on 2N Access Units?
- Static IP address - How to set up static IP address on 2N BRI Lite/Enterprise
- Static-IP-address-How-to-set-up-static-IP-address-on-2N-Lift8
- Static IP address - How to set up static IP address on VBN?
- Static IP address - How to set up static IP address SG EN
- Static IP address - How to set up static IP address VoiceBlueMax
- Static IP address in 2N IP Intercoms
- Static IP address on MikroTik router
- Student Monitoring System - VoiceBlue Next
- Subscription - How to purchase in My2N
- Summer or Winter time does not change automatically
- Tamper switch - Location (installation) and configuration
- Tarrifs - Tariffs settings complete description
- Technical issue - How to report an issue on VoiceBlue?
- Telephone number VoiceBlue Next - Can I replace SIM card telephone number with my own number?
- Test call for VoiceBlue Next- How to make a test call from softphone?
- Test call - How to make a test call from Softphone to 2N VoiceBlue MAX
- Test call - How to make test calls?
- Test server - 2N SmartCom server configuration
- Test server with web interface - 2N SmartCom server configuration
- The example of OSDP module connecting and using on 2N Intercom
- The IMSI or SCID file cannot be imported in 2N SIM Star
- There is none or only oneway audio on your VoIP calls
- The SIM cards do not assign or not log in GSMs view on 2N SIM Star
- The simulation of incoming calls with 2N SIM Star Server does not work
- This is a walkthrough how to interconnect 2N SIP SPEAKER HORN with MY2N to let a user announce from a cell phone to the 2N SIP SPEAKER HORN
- Time Profiles
- Time profiles - managing time restricted access for 2N Fortis
- Time settings - How to configure in 2N Access Commander
- Trace - How to get a trace from VoiceBlue Lite?
- Trace - How to get internal trace from 2N BRI Lite / 2N BRI Enterprise?
- Trace - How to get internal trace from 2N StarGate / 2N BlueTower?
- Trace - How to get internal trace from 2N VoiceBlue MAX?
- Trace - How to get internal trace from 2N VoiceBlue Next?
- Trace - trying to trace ("AT!Rx", "AT!Lx" commands) 2N StarGate or 2N BlueTower responds "BUSY".
- Troubleshooting basics – Configuration backup, network trace, syslog and ping tool on 2N IP Intercoms
- Troubleshooting - How to troubleshoot an issue on 2N Lift products (ST)
- Troubleshooting of issue with 2N Access Commander
- Two-factor (2FA) authentication in 2N Access Commander
- unable-to-establish-connection-between-2n-voiceblue-next-and-2n-xapi-server
- Unit share - Is it possible to share one Machine room unit for more shafts?
- Unlock buttons - Configuration in 2N Answering Units
- Unlock the door with the switch codes in My2N - How to set it
- Unsatisfied Audio quality in 2N Analogue Intercoms
- Update of the system
- upgrade-from-firmware-119-and-lower-to-firmware-122-and-higher
- Upgrading-firmware-on-2N-LiftIP
- Upgrading splitter from 1.x.x to 2x.x on Lift 8
- Upload a video to display on 2N IP Intercom
- User Defined Functions (UDF) - what is it and how to configure it in 2N SmartCOM?
- user-message-how-to-record-and-upload-user-message-to-2n-lift1-communicator
- User Reservation - How to set it in 2N NetStar
- Using configuration templates in 2N Elevator Center
- Using Group Authentication / Access key in 2N Indoor Touch 2.0
- Vega LPR integration with 2N IP Intercoms and Access Units
- Video - 2N Access Commander - Basic setup guide
- Video - 2N Indoor Touch 2.0 - Setting up calls between 2N Indoor Touch 2.0 and 2N IP intercoms
- Video - 2N Indoor Touch - doorbell button installation and configuration
- Video - 2N IP Audio system - Basic setting
- Video - 2N IP Audio system - MicroSD card usage
- Video - 2N IP Intercom - How to switch between internal and external cameras using DTMF
- Video - 2N IP intercom - IP address, how to find it out and switch between DHCP and static modes
- Video - 2N IP intercoms - Calling multiple destinations in sequence and in parallel by pressing one button
- Video - 2N IP Verso - Fingerprint module installation and configuration
- Video - 2N IP Verso - Flush frame installation - brickwall
- Video - 2N IP Verso - Flush frame installation - plasterboard
- Video - 2N Net Mic - Introduction & setup
- Video - 2N OS devices - Factory Reset procedure
- Video - 2N SIP Mic - Basic setting
- Video - 2N SIP Speaker Horn - Basic setting
- Video - 2N® IP Verso - Touch display module options
- Video - Configuration of 2N IP intercom with 2N IP Eye
- Video issue - 2N IP Intercom does not send video during a call
- Video - My2N & 2N Indoor Touch - how to configure local or cloud calling
- Video - My2N platform - registration and setup of cloud calling
- Video – 2N Indoor Compact - flush installation guide
- Video – 2N Indoor Talk - flush installation guide
- Video – 2N IP Base - surface installation guide
- Virtual Card ID
- Virtualization (VT-x/AMD-V) enabling on your computer
- Virtual Numbers and Telephone Mode
- Virtual Ring Tone - How to upload Virtual Ring Tone Message without configuration tool?
- Virtual Sound Card - Login was unsuccessful
- Visitors in My2N – How to create visitors
- Visitors management - Manage visits in 2N Access Commander
- Visitors management & Simplified user interface
- Vivotek video server - How to connect with 2N Analog Intercom
- VLC media player - watch and record video from 2N IP Intercom
- VoiceMail Classic - How to set it in 2N NetStar
- Voicemail - How to configure
- VoiceMail to Email - How to set it in 2N NetStar
- Voice recognition - How to set Voice recognition (number portability detection)?
- VoIP ATA converter - How to connect 2N Analog Intercom via Well ATA-171P converter to VoIP server
- VoIP card - I have a new VoIP card. What should I do to make it work?
- voip-card-led-is-solid-red
- voip-gateway-how-to-set-2n-netstar-as-a-voip-gateway
- VoIP trunk - How to setup with IP phone
- volume-control-how-to-increase-or-decrease-volume-of-2n-lift8-car-unit
- VPN connection on LiftGate
- Web interface access - 2N IP intercoms
- Web interface access when running old firmware on Indoor View
- Web interface of 2N Indoor Touch is slow
- Web scheduler - How to work with 2N IP Audio Web Scheduler
- What are the methods of sending and receiving SMS messages using 2N BRI Lite and 2N BRI Enterprise?
- What is Callback?
- What is the maximum number of VoIP calls via UMTS module?
- What LAN/Wi-Fi infrastructure do I need for 2N Indoor Touch installation?
- What to check if the FW update on a 2N Indoor Touch is failing?
- What to do if a 3rd party app is displayed in portrait mode on 2N Indoor Touch?
- What to do if the intercom does not dial Mobile Video
- What to do when OfficeRoute stopped working after a month.
- Which devices can be connected - 2N Access Commander
- Which TCP-IP ports do I need to open for the connection to the Omega PBX?
- Wiegand interface Configuration in 2N Intercom
- Wiegand interface - Function overview
- Wireless M-bus - 2N SmartCom PRO decryption configuration
- Wireshark trace - How to make a trace of a call?
- Wireshark trace - How to make a trace of call
- Working with HTTP API on 2N Indoor Touch
- Yealink IP Phone SIP-T26P vs. 2N SIP Audio Converter - Sending and receiving multicast
- Your account does not contain any assigned devices - message in My2N application
De artikelen zijn alleen beschikbaar in het Engels.