Factory Reset

2N LTE Verso is equipped with a RESET button. Press the button shortly (< 1 s) to restart the system without changing configuration.

Follow the instructions below to reset the factory default values:

1. Press the RESET button.
2. Wait until the red and green LEDs on the device come on simultaneously (approx. 20 s).
3. Wait until the red LED goes off (approx. 5 s).
4. Wait until the green LED goes off and the red LED comes on again (approx. 5 s).
5. Wait until the red LED goes off (another 5 s).
6. Release the RESET button.

Firmware v2.26 and newer:

+ SOUND SIGNALISATION - release the button after 4 short beeps immediately 

Caution:

In case of resetting the factory default settings on a device with a firmware v2.18 or newer it is necessary to reprogram the

2N Security Relay using the instructions from section Main and Extending Modules.

From FW v2.26 the intercom performs audio feedback during the resetting procedure.

More information:

•        2N IP Intercoms (official 2N web)