Connection of 2 devices to one lock
Connection of two 2N devices to one lock using potential outputs
Graphic
| Info: To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock. |
Schematic
| Info: To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock. |
Connection of two 2N devices to one lock using non-potential relays
Graphic
| Info: For the lock connection, we highly recommend using the output with installed 2N Security Relay (Part No. 9159010) for enhanced installation security. |
Schematic
| Info: For the lock connection, we highly recommend using the output with installed 2N Security Relay (Part No. 9159010) for enhanced installation security. |
Connection of one 2N device and 3rd party controller using potential outputs
Graphic
| Info: To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock. |
Schematic
| Info: To prevent damaging the unit, please install diodes to both power supplies that are connected to the same terminal on the lock. |
Date of release: 27. 5. 2021
Used devices in manual:
- 2N IP Verso (firmware version 2.32)
- 2N Access Unit 2.0 (firmware version 2.32)
List of compatible Hardware:
- 2N IP Verso
- 2N IP Vario
- 2N IP Force
- 2N IP Safety
- 2N IP Base
- 2N IP Solo
- 2N Access Unit 1.0 & 2.0
- 2N Access Unit M