Hulp nodig? Vraag het aan AI

Selecteer uw regio en taal

EMEA

AMER

APAC

Door lock does not open after dialing 00

The steps in this article require using the web interface of a 2N device. Please follow this manual in case this is your first time using the web interface.

Prerequisites

  • 2N IP Intercom with the latest firmware,
    no additional license is required.

 

Click here for instructions for firmware 3.0 and newer.

Read more about the differences in long-term support and active track 2N OS.

 

Firmware 2.50 and older (LTS)

Why code 00 does not work for opening door

  • This code can be entered only from your phone (IP phone, softphone, etc.).
    For usage on the keypad please create a new code.

2N IP Intercom - Hardware - Switches - Switch 1 - Switch Codes

 

  • The code for opening the door has to be confirmed with * (00*).
    Resp. if you enable "Legacy switch code", then the confirmation is not necessary.

2N IP Intercom - Hardware - Switches - Advanced - Legacy Switch Code

 

  • Check that all 3 types of DTMF receiving modes are enabled.

2N IP Intercom - Calling - SIP 1 - Audio - DTMF for receiving

 

Firmware 3.0 and newer

Why code 00 does not work for opening door

  • This code can be entered only from your phone (IP phone, softphone, etc.).
    For usage on the keypad please create a new code edit the existing one. Go to Integration, then click the three dots on an exsiting code to edit or click the edit icon to add a new code. 

 

 

  • The code for opening the door has to be confirmed with * (00*).
    Resp. if you enable "Legacy switch code", then the confirmation is not necessary.

 

  • Check that all 3 types of DTMF receiving modes are enabled.

 

Was deze pagina nuttig?